ESP32IGate V1.1 (Factory reset require)

V1.1 History Update

-Add Tracker mode
-Add GNSS and TNC2 Packet monitor
-Add GNSS from UART0,UART1,UART2,TCP Client
-Add External TNC from UART0,UART1,UART2,Yaesu Packet
-Fix AFSK GPIO pin
-Fix more bug

V1.1b History Update

-Fix Serial GPIO bug
-Fix Tracker mode bug
-Fix External TNC Yaesu packet

V1.1c History Update

-Fix Smart beacon

V1.1d History Update

-Fix WiFi AP Connection loss

Howto Update new firmware

• 1.Download firmware and open the web browser in to webservice
• 2.Select Tab About/Firmware and click Choose File for firmware and click Firmware Update , wait and reboot system
• 3 Factory re connect the USB plug, when display logo on OLED or LED RX,TX light then press hold the BOOT button
• 4.You can enter configuration mode in 2 ways:
• 4.1 Default config then go to WiFi AP SSID: ESP32IGate PASS: aprsthnetwork and open a web browser to the website. http://192.168.4.1 default web auth USER: admin PASS: admin
• 4.2 Default config then go to share or set router WiFi SSID: APRSTH PASS: aprsthnetwork and use web browser by IP from router/share smartphone default web auth USER: admin PASS: admin

ESP32IGate firmware installation (do it first time, next time via the web browser)

• 1.Connect the USB cable to the ESP32DR,ESP32DR_SA868,ESP32-Doit-devkit.
• 2.Press and hold the BOOT button (without releasing it), then press the RST button, then release the RST button, and finally release the BOOT button
• 3.Download firmware and open the program ESP32 DOWNLOAD TOOL, set it in the firmware upload program, set the firmware to ESP32IGate_Vxx.bin for non OELD or ESP32IGate_Vxx_OLED.bin with OELD Display, location 0x10000 and partitions.bin at 0x8000 and bootloader.bin at 0x0000 and boot_app0.bin at 0xe000
• 4.Click the START button in the program and wait for the upload to complete
• 5 Factory re connect the USB plug, when display logo on OLED or LED RX,TX light then press hold the BOOT button
• 6.You can enter configuration mode in 2 ways:
• 6.1 Default config then go to WiFi AP SSID: ESP32IGate PASS: aprsthnetwork and open a web browser to the website. http://192.168.4.1 default web auth USER: admin PASS: admin
• 6.2 Default config then go to share or set router WiFi SSID: APRSTH PASS: aprsthnetwork and use web browser by IP from router/share smartphone default web auth USER: admin PASS: admin

ESP32 Flash Download Tools

https://www.espressif.com/en/support/download/other-tools