added info for Upcoming NERC Network Equipment and Switch Maintenance

.pre-commit-config.yaml

@@ -12,7 +12,7 @@ repos:
           - id: remove-tabs
 
     - repo: https://github.com/pre-commit/pre-commit-hooks
-      rev: v4.6.0
+      rev: v5.0.0
       hooks:
           - id: trailing-whitespace
             args: [--markdown-linebreak-ext=md]
@@ -37,21 +37,11 @@ repos:
             exclude: .*.param.yaml
 
     - repo: https://github.com/igorshubovych/markdownlint-cli
-      rev: v0.41.0
+      rev: v0.43.0
       hooks:
           - id: markdownlint
             args: [-c, .markdownlint.yaml, --fix]
 
-    - repo: https://github.com/pre-commit/mirrors-prettier
-      rev: v4.0.0-alpha.8
-      hooks:
-          - id: prettier
-            args:
-                - --ignore-path
-                - .prettierignore
-                - --config
-                - .prettierrc.yaml
-
     - repo: https://github.com/Yelp/detect-secrets
       rev: v1.5.0
       hooks:

.yamllint.yaml

@@ -1,26 +1,30 @@
-extends: default
+.yamllint:
+    extends: default
 
-ignore: |
-    *.param.yaml
+    ignore: |
+        *.param.yaml
 
-rules:
-    braces:
-        level: error
-        max-spaces-inside: 1 # To format with Prettier
-    comments:
-        level: error
-        min-spaces-from-content: 1 # To be compatible with C++ and Python
-    document-start:
-        level: error
-        present: false # Don't need document start markers
-    line-length: disable # Delegate to Prettier
-    indentation:
-        indent-sequences: whatever
-    hyphens:
-        max-spaces-after: 4
-    truthy:
-        level: error
-        check-keys: false # To allow 'on' of GitHub Actions
-    quoted-strings:
-        level: error
-        required: only-when-needed # To keep consistent style
+    rules:
+        braces:
+            level: error
+            max-spaces-inside: 1 # Ensure consistent spacing inside braces
+        comments:
+            level: error
+            min-spaces-from-content: 1 # Keep compatibility with C++ and Python
+        document-start:
+            level: error
+            present: false # Document start markers not needed
+        line-length:
+            level: warning
+            max: 80 # Enforce a maximum line length
+        indentation:
+            spaces: 4 # Set tab width to 4 spaces
+            indent-sequences: whatever
+        hyphens:
+            max-spaces-after: 4
+        truthy:
+            level: error
+            check-keys: false # Allow 'on' for GitHub Actions
+        quoted-strings:
+            level: error
+            required: only-when-needed # Ensure consistent style for strings

docs/get-started/cost-billing/billing-process-for-harvard.md

@@ -32,11 +32,11 @@ Please follow these two steps to ensure proper billing setup:
 
     !!! abstract "What if you already have an existing Customer Code?"
 
-         Please note that if you already have an existing active NERC account, you
-         need to provide your HUIT Customer Code to NERC. If you think your department
-         may already have a HUIT account but you don’t know the corresponding Customer
-         Code then you can [contact HUIT Billing](https://billing.huit.harvard.edu/portal/allusers/contactus)
-         to get the required Customer Code.
+        Please note that if you already have an existing active NERC account, you
+        need to provide your HUIT Customer Code to NERC. If you think your department
+        may already have a HUIT account but you don’t know the corresponding Customer
+        Code then you can [contact HUIT Billing](https://billing.huit.harvard.edu/portal/allusers/contactus)
+        to get the required Customer Code.
 
 2.  During the Resource Allocation review and approval process, we will utilize the
     HUIT "Customer Code" provided by the PI in step #1 to align it with the approved

docs/openshift/logging-in/web-console-overview.md

@@ -56,9 +56,9 @@ administrators and cluster administrators can view the Administrator perspective
 
 !!! note "Important Note"
 
-The default web console perspective that is shown depends on the role of the
-user. The **Administrator** perspective is displayed by default if the user is
-recognized as an administrator.
+    The default web console perspective that is shown depends on the role of the
+    user. The **Administrator** perspective is displayed by default if the user is
+    recognized as an administrator.
 
 ### About the Developer perspective in the web console
 
@@ -67,8 +67,8 @@ services, and databases.
 
 !!! info "Important Note"
 
-The default view for the OpenShift Container Platform web console is the **Developer**
-perspective.
+    The default view for the OpenShift Container Platform web console is the **Developer**
+    perspective.
 
 The web console provides a comprehensive set of tools for managing your projects
 and applications.
@@ -82,8 +82,8 @@ located on top navigation as shown below:
 
 !!! info "Important Note"
 
-You can identify the currently selected project with **tick** mark and also
-you can click on **star** icon to keep the project under your **Favorites** list.
+    You can identify the currently selected project with **tick** mark and also
+    you can click on **star** icon to keep the project under your **Favorites** list.
 
 ## Navigation Menu
 

docs/openstack/access-and-security/security-groups.md

@@ -79,8 +79,8 @@ Enter the following values:
 
     !!! note "Note"
 
-        To accept requests from a particular range of IP addresses, specify the IP
-        address block in the CIDR box.
+        To accept requests from a particular range of IP addresses, specify the
+        IP address block in the CIDR box.
 
 The new rule now appears in the list. This signifies that any instances using
 this newly added Security Group will now have SSH port 22 open for requests
@@ -141,10 +141,10 @@ Enter the following values:
 
 -   CIDR: 0.0.0.0/0
 
-!!! note "Note"
+    !!! note "Note"
 
-    To accept requests from a particular range of IP addresses, specify the IP
-    address block in the CIDR box.
+        To accept requests from a particular range of IP addresses, specify the
+        IP address block in the CIDR box.
 
 The new rule now appears in the list. This signifies that any instances using
 this newly added Security Group will now have RDP port 3389 open for requests

docs/openstack/create-and-connect-to-the-VM/using-vpn/wireguard/index.md

@@ -126,10 +126,10 @@ To deactivate config: `wg-quick down /path/to/file_name.config`
 
 !!! note "Important Note"
 
-      You need to contact your project administrator to get your own WireGUard
-      configuration file (file with .conf extension). Download it and Keep it in
-      your local machine so in next steps we can use this configuration client
-      profile file.
+    You need to contact your project administrator to get your own WireGUard
+    configuration file (file with .conf extension). Download it and Keep it in
+    your local machine so in next steps we can use this configuration client
+    profile file.
 
 A WireGuard client or compatible software is needed to connect to the WireGuard
 VPN server. Please install[one of these clients](https://www.wireguard.com/install/)

docs/openstack/data-transfer/data-transfer-from-to-vm.md

@@ -434,20 +434,20 @@ using FTP, FTPS, SCP, SFTP, WebDAV, or S3 file transfer protocols.
 
 !!! info "Default User name based on OS"
 
-      - **all Ubuntu images**: ubuntu
+    - **all Ubuntu images**: ubuntu
 
-      - **all AlmaLinux images**: almalinux
+    - **all AlmaLinux images**: almalinux
 
-      - **all Rocky Linux images**: rocky
+    - **all Rocky Linux images**: rocky
 
-      - **all Fedora images**: fedora
+    - **all Fedora images**: fedora
 
-      - **all Debian images**: debian
+    - **all Debian images**: debian
 
-      - **all RHEL images**: cloud-user
+    - **all RHEL images**: cloud-user
 
-      If you still have VMs running with deleted **CentOS** images, you need to
-      use the following default username for your CentOS images: `centos`.
+    If you still have VMs running with deleted **CentOS** images, you need to
+    use the following default username for your CentOS images: `centos`.
 
 **"Password"**: "`<Leave blank as you using SSH key>`"
 
@@ -462,12 +462,12 @@ from the file picker.
 
 !!! tip "Helpful Tip"
 
-      You can save your above configured site with some preferred name by
-      clicking the "Save" button and then giving a proper name to your site.
-      This prevents needing to manually enter all of your configuration again the
-      next time you need to use WinSCP.
+    You can save your above configured site with some preferred name by
+    clicking the "Save" button and then giving a proper name to your site.
+    This prevents needing to manually enter all of your configuration again the
+    next time you need to use WinSCP.
 
-      ![Save Site WinSCP](images/winscp-save-site.png)
+    ![Save Site WinSCP](images/winscp-save-site.png)
 
 #### Using WinSCP
 
@@ -516,17 +516,17 @@ connections to servers, enterprise file sharing, and various cloud storage platf
 
 !!! info "Default User name based on OS"
 
-      - **all Ubuntu images**: ubuntu
+    - **all Ubuntu images**: ubuntu
 
-      - **all AlmaLinux images**: almalinux
+    - **all AlmaLinux images**: almalinux
 
-      - **all Rocky Linux images**: rocky
+    - **all Rocky Linux images**: rocky
 
-      - **all Fedora images**: fedora
+    - **all Fedora images**: fedora
 
-      - **all Debian images**: debian
+    - **all Debian images**: debian
 
-      - **all RHEL images**: cloud-user
+    - **all RHEL images**: cloud-user
 
 **"Password"**: "`<Leave blank as you using SSH key>`"
 
@@ -585,20 +585,20 @@ computer (shared drives, Dropbox, etc.)
 
 !!! info "Default User name based on OS"
 
-      - **all Ubuntu images**: ubuntu
+    - **all Ubuntu images**: ubuntu
 
-      - **all AlmaLinux images**: almalinux
+    - **all AlmaLinux images**: almalinux
 
-      - **all Rocky Linux images**: rocky
+    - **all Rocky Linux images**: rocky
 
-      - **all Fedora images**: fedora
+    - **all Fedora images**: fedora
 
-      - **all Debian images**: debian
+    - **all Debian images**: debian
 
-      - **all RHEL images**: cloud-user
+    - **all RHEL images**: cloud-user
 
-      If you still have VMs running with deleted **CentOS** images, you need to
-      use the following default username for your CentOS images: `centos`.
+    If you still have VMs running with deleted **CentOS** images, you need to
+    use the following default username for your CentOS images: `centos`.
 
 **"Key file"**: "Browse and choose the appropriate SSH Private Key from you
 local machine that has corresponding Public Key attached to your VM"

docs/openstack/openstack-cli/openstack-CLI.md

@@ -37,10 +37,10 @@ You can download the environment file with the credentials from the [OpenStack d
 
 !!! note "Important Note"
 
-      Please note that an application credential is only valid for a single
-      project, and to access multiple projects you need to create an application
-      credential for each. You can switch projects by clicking on the project name
-      at the top right corner and choosing from the dropdown under "Project".
+    Please note that an application credential is only valid for a single
+    project, and to access multiple projects you need to create an application
+    credential for each. You can switch projects by clicking on the project name
+    at the top right corner and choosing from the dropdown under "Project".
 
 After clicking "Create Application Credential" button, the **ID** and
 **Secret** will be displayed and you will be prompted to `Download openrc file`

docs/openstack/persistent-storage/mount-the-object-storage.md

@@ -977,9 +977,9 @@ Also, check that binding to `localhost` is working fine by running the following
 
 !!! warning "Important Note"
 
-      The `netstat` command may not be available on your system by default. If
-      this is the case, you can install it (along with a number of other handy
-      networking tools) with the following command: `sudo apt install net-tools`.
+    The `netstat` command may not be available on your system by default. If
+    this is the case, you can install it (along with a number of other handy
+    networking tools) with the following command: `sudo apt install net-tools`.
 
 ##### Configuring a Redis Password
 

docs/openstack/persistent-storage/object-storage.md

@@ -260,9 +260,9 @@ This is a python client for the Swift API. There's a [Python API](https://github
 
 !!! note "Choosing Correct Python Interpreter"
 
-      Make sure you are able to use `python` or `python3` or **`py -3`** (For
-      Windows Only) to create a directory named `venv` (or whatever name you
-      specified) in your current working directory.
+    Make sure you are able to use `python` or `python3` or **`py -3`** (For
+    Windows Only) to create a directory named `venv` (or whatever name you
+    specified) in your current working directory.
 
 -   Activate the virtual environment by running:
 
@@ -1062,9 +1062,9 @@ respectively.
 
 !!! note "Helpful Tips"
 
-      You can save your above configured session with some preferred name by
-      clicking the "Save" button and then giving a proper name to your session.
-      So that next time you don't need to again manually enter all your configuration.
+    You can save your above configured session with some preferred name by
+    clicking the "Save" button and then giving a proper name to your session.
+    So that next time you don't need to again manually enter all your configuration.
 
 #### Using WinSCP
 

docs/openstack/persistent-storage/transfer-a-volume.md

@@ -104,9 +104,9 @@ openstack volume transfer request create my-volume
 
 !!! tip "Pro Tip"
 
-      If your volume name includes spaces, you need to enclose them in quotes,
-      i.e. `"<VOLUME_NAME_OR_ID>"`.
-      For example: `openstack volume transfer request create "My Volume"`
+    If your volume name includes spaces, you need to enclose them in quotes,
+    i.e. `"<VOLUME_NAME_OR_ID>"`.
+    For example: `openstack volume transfer request create "My Volume"`
 
 -   The volume can be checked as in the transfer status using
     `openstack volume transfer request list` as follows and the volume is in status

nerc-theme/main.html

@@ -1,12 +1,12 @@
 {% extends "base.html" %} {% block announce %}
 <div class="parent">
     <div class="maintain">
-        <div>Upcoming Multi-Day NERC OpenStack Platform Version Upgrade</div>
+        <div>Upcoming NERC Network Equipment and Switch Maintenance</div>
         <div>
-            (Dec 12, 2024 8:00 AM ET - Dec 14, 2024 8:00 PM ET)
+            (Tuesday Jan 7, 2025 9 AM ET - Wednesday Jan 8, 2025 9 AM ET)
             <a
                 style="color: #00efff"
-                href="https://nerc.mghpcc.org/event/openstack-version-upgrade-20241212/"
+                href="https://nerc.mghpcc.org/event/network-equipment-switch-maintenance-20250107/"
                 target="_blank"
                 >[Timeline and info]</a
             >