Skip to content

Ethernet library for Arduino and Ethernetshield2 / WIZ550io / WIZ850io / USR-ES1 with Wiznet W5500 chip

Notifications You must be signed in to change notification settings

netwizeBE/Ethernet3

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

89 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Ethernet3 v1.5

Ethernet library for Arduino and Ethernetshield2 / WIZ550io / WIZ850io / USR-ES1 with Wiznet W5500 chip based on the Ethernet2 library of arduino.org

I added many new functionalities.

add possibility to choose SPI port

Set following defines to use SPIx on the board

#define W5500_MOSI PB15   
#define W5500_MISO PB14
#define W5500_SCLK PB13

new in 1.5

  • custom hostname for DHCP
  • the PHY is configurable
  • Wake on LAN
  • added new example for webclient "WebClientReadResponse.ino"

You need to include

#include <Ethernet3.h> // instead Ethernet.h
#include <EthernetUdp3.h> // instead EthernetUdp.h for UDP functionality

Custom Hostname

For use with DHCP you can set a custom hostname, this must be done before Ethernet.begin(mac).

Ethernet.setHostname(char* hostname);

PHY Configuration

The PHY is now configurable, this must done after Ethernet.begin() Following modes are possible: HALF_DUPLEX_10, FULL_DUPLEX_10, HALF_DUPLEX_100, FULL_DUPLEX_100, FULL_DUPLEX_100_AUTONEG, POWER_DOWN, ALL_AUTONEG (default)

Ethernet.phyMode(phyMode_t mode);

Wake on LAN

You can set the Wake on LAN functionality

Ethernet.WoL(bool wol);

what's next

In version 2 there will mDNS and a large code cleanup

A new NTP library is published https://github.com/sstaub/NTP

New init procedure !!!

The init of the Ethernetinterface changed, the ordner is now:

Ethernet.begin(mac, ip, subnet, gateway, dns);

This is more logical.

Multicast support

Multicast for udp added. You need to set the Multicast IP address and port to listen.

example

EthernetUdp udp
upd.beginMulticast(multicastIP, port);

Unicast blocking support

An Unicast blocking function is added to set and get the flag in a UDP socket.

void setUnicastBlock(bool block);
bool getUnicastBlock();

example

EthernetUDP udp;
udp.setUnicastBlock(true);

// to restore the value to standard

udp.setUnicastBlock(false);
udp.setUnicastBlock();

PHY support

Added some function to read the PHYCFGR in Ethernet3.

uint8_t phyState(); // returns the PHYCFGR
uint8_t link(); // returns the linkstate, 1 = linked, 0 = no link
const char* linkReport(); // returns the linkstate as a string
uint8_t speed(); // returns speed in MB/s
const char* speedReport(); // returns speed as a string
uint8_t duplex(); // returns duplex mode 0 = no link, 1 = Half Duplex, 2 = Full Duplex
const char* duplexReport(); // returns duplex mode as a string

example

Serial.println(Ethernet.linkReport()); 

MAC address

Added some function to read the MAC address in Ethernet3, this is helpfull when you use Wiznet boards like WIZ550io with build in MAC address.

void macAddress(uint8_t mac[]); // get the MAC Address
const char* macAddressReport(); // returns the the MAC Address as a string

example

uint8_t mac[6]; // array for mac address
Ethernet.macAddress(mac);

Socket RAM-Size

You can de- or increase the RAM-Size for the sockets, this must be done before Ethernet.begin(...)

The possible socketnumbers are:

Ethernet.init(1); -> 1 Socket with 16k RX/TX buffer
Ethernet.init(2); -> 2 Socket with 8k RX/TX buffer
Ethernet.init(4); -> 4 Socket with 4k RX/TX buffer
Ethernet.init(); -> 8 Socket with 2k RX/TX buffer

Be carefull with the MAX_SOCK_NUM in w5500.h , it cannot changed dynamicly.

example

Ethernet.init(4); // reduce to 4 Socket, each with 4k RX/TX buffer
Ethernet.begin();

RST and CS pin settings

You can set the CS and (Hardware) RST (e.g. WIZ550io or USR-ES1), this must be done before Ethernet.begin(...)

Standard is Pin 10 for CS and Pin 9 for RST

Ethernet.setCsPin(3); // set Pin 3 for CS
Ethernet.setRstPin(4); // set Pin 4 for RST

example

Ethernet.setRstPin(); // set Pin 9 for RST
Ethernet.begin();

Hard- and Software Reset

Two new functions to make resets, Softreset can done only after Ethernet.begin(...)

For Hardware Reset you need to set the Pin number.

Ethernet.softreset(); // performs a software reset
Ethernet.hardreset(); // performs a hardware reset

example

Ethernet.setRstPin(); // set Pin 9 for RST
Ethernet.begin();
Ethernet.hardreset();

Additional TCP settings in Ethernet

There are two function to set and get the retransmission timeout and retry count, this helps to solve problem with TCP connections with unexpected very long timeouts. Beware the the timeout value multiplier is 100us!

void Ethernet.setRtTimeOut(uint16_t timeout);
uint16_t Ethernet.getRtTimeOut();
void Ethernet.setRtCount(uint8_t count);
uint8_t Ethernet.getRtCount();

example

Ethernet.setRtTimeOut(500); // timeout 50ms
Ethernet.setRtCount(2);

// to restore the value to standard

Ethernet.setRtTimeOut();
Ethernet.setRtCount();

Additional settings in EthernetClient

ACK feature

A 'No Delayed ACK' function is added to set and get the flag in a TCP socket.

void setNoDelayedACK(bool ack);
bool getNoDelayedACK();

example

EthernetClient tcp;
tcp.setNoDelayedACK(true);

// to restore the value to standard

tcp.setNoDelayedACK(false);
tcp.setNoDelayedACK();

remoteIP and remoteMAC adresses

Two new functions for getting the IP and MAC address of a remote host.

void remoteIP(uint8_t *ip);
void remoteMAC(uint8_t *mac);

Additional settings in EthernetUDP

Broadcast feature in EthernetUDP

A Broadcast blocking function is added to set and get the flag in a UDP socket.

void setBroadcastBlock(bool block);
bool getBroadcastBlock();

example

EthernetUDP udp;
udp.setBroadcastBlock(true);

// to restore the value to standard

udp.setBroadcastBlock(false);
udp.setBroadcastBlock();

remoteIP and remoteMAC adresses

Two new functions for getting the IP and MAC address of a remote host.

void remoteIP(uint8_t *ip);
void remoteMAC(uint8_t *mac);

About

Ethernet library for Arduino and Ethernetshield2 / WIZ550io / WIZ850io / USR-ES1 with Wiznet W5500 chip

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C++ 97.8%
  • C 2.2%