Skip to content
/ dwusb Public

Windows driver for the DesignWare USB 2.0 HS OTG Controller as used in the Raspberry Pi 3.

Notifications You must be signed in to change notification settings

nta/dwusb

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

2 Commits
 
 
 
 
 
 
 
 

Repository files navigation

dwusb UCX controller driver

The code in this repository implements an UCX-based controller driver for Windows 10 on ARM(64) for the Synopsys® DesignWare® USB 2.0 HS OTG Controller, specifically, the variant used in the Raspberry Pi 3.

The driver is fairly unfinished and unreliable, some inherently-wrong decisions were made during development, mainly with regards to channel allocation and request queue handling.

It's been tested with a single external USB 2.0 hub connected to one of the on-board RPi3 LAN controller hub ports, and connecting a generic simple (full-speed?) HP Modular Keyboard device to a port on this hub. Any more devices would run into reliability issues.

This driver is provided as-is without support, both to serve as a somewhat simplified example of using the UCX APIs, and perhaps as a base for people to build upon for device enablement on the RPi3.

Attribution

Large portions of code were based on the USBXHCI driver sample included in the WDK, also the GPL'd RaspberryPiPkg USB driver, and the implementation in Das U-Boot the former was based upon. Therefore, the modified driver shall be considered as GPL-licensed as well, in the best case.

About

Windows driver for the DesignWare USB 2.0 HS OTG Controller as used in the Raspberry Pi 3.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages