reconfigure spec_helper.rb with new configuration

Signed-off-by: Thomas Poignant <[email protected]>

providers/openfeature-go-feature-flag-provider/spec/openfeature/gofeatureflag/goff_api_spec.rb

@@ -1,6 +1,6 @@
 require "spec_helper"
 
-describe OpenFeature::GoFeatureFlag::GoFeatureFlagApi do
+RSpec.describe OpenFeature::GoFeatureFlag::GoFeatureFlagApi do
   subject(:goff_api) do
     options = OpenFeature::GoFeatureFlag::Options.new(endpoint: "http://localhost:1031")
     described_class.new(options: options)

providers/openfeature-go-feature-flag-provider/spec/openfeature/gofeatureflag/options_spec.rb

@@ -1,6 +1,6 @@
 require "spec_helper"
 
-describe OpenFeature::GoFeatureFlag::Options do
+RSpec.describe OpenFeature::GoFeatureFlag::Options do
   context "#endpoint" do
     it "should have a valid endpoint set" do
       options = OpenFeature::GoFeatureFlag::Options.new(endpoint: "http://localhost:1031")

providers/openfeature-go-feature-flag-provider/spec/openfeature/gofeatureflag/provider_spec.rb

@@ -1,6 +1,6 @@
 require "spec_helper"
 
-describe OpenFeature::GoFeatureFlag::Provider do
+RSpec.describe OpenFeature::GoFeatureFlag::Provider do
   subject(:goff_provider) do
     options = OpenFeature::GoFeatureFlag::Options.new(endpoint: "http://localhost:1031")
     described_class.new(options: options)

providers/openfeature-go-feature-flag-provider/spec/spec_helper.rb

@@ -1,105 +1,27 @@
 # frozen_string_literal: true
 
 require "bundler/setup"
+require "rspec"
 require "openfeature/go-feature-flag/go_feature_flag_provider"
 require "openfeature/go-feature-flag/options"
 require "openfeature/go-feature-flag/goff_api"
 require "open_feature/sdk"
 require "webmock/rspec"
 
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# See https://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
 RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
   config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
     expectations.include_chain_clauses_in_custom_matcher_descriptions = true
   end
 
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
   config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
     mocks.verify_partial_doubles = true
   end
 
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
   config.shared_context_metadata_behavior = :apply_to_host_groups
-
-  # The settings below are suggested to provide a good initial experience
-  # with RSpec, but feel free to customize to your heart's content.
-  #   # This allows you to limit a spec run to individual examples or groups
-  #   # you care about by tagging them with `:focus` metadata. When nothing
-  #   # is tagged with `:focus`, all examples get run. RSpec also provides
-  #   # aliases for `it`, `describe`, and `context` that include `:focus`
-  #   # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  #   config.filter_run_when_matching :focus
-  #
-  #   # Allows RSpec to persist some state between runs in order to support
-  #   # the `--only-failures` and `--next-failure` CLI options. We recommend
-  #   # you configure your source control system to ignore this file.
-  #   config.example_status_persistence_file_path = "spec/examples.txt"
-  #
-  #   # Limits the available syntax to the non-monkey patched syntax that is
-  #   # recommended. For more details, see:
-  #   # https://relishapp.com/rspec/rspec-core/docs/configuration/zero-monkey-patching-mode
-  #   config.disable_monkey_patching!
-  #
-  #   # This setting enables warnings. It's recommended, but in some cases may
-  #   # be too noisy due to issues in dependencies.
-  #   config.warnings = true
-  #
-  #   # Many RSpec users commonly either run the entire suite or an individual
-  #   # file, and it's useful to allow more verbose output when running an
-  #   # individual spec file.
-  #   if config.files_to_run.one?
-  #     # Use the documentation formatter for detailed output,
-  #     # unless a formatter has already been configured
-  #     # (e.g. via a command-line flag).
-  #     config.default_formatter = "doc"
-  #   end
-  #
-  #   # Print the 10 slowest examples and example groups at the
-  #   # end of the spec run, to help surface which specs are running
-  #   # particularly slow.
-  #   config.profile_examples = 10
-  #
-  #   # Run specs in random order to surface order dependencies. If you find an
-  #   # order dependency and want to debug it, you can fix the order by providing
-  #   # the seed, which is printed after each run.
-  #   #     --seed 1234
-  #   config.order = :random
-  #
-  #   # Seed global randomization in this process using the `--seed` CLI option.
-  #   # Setting this allows you to use `--seed` to deterministically reproduce
-  #   # test failures related to randomization by passing the same `--seed` value
-  #   # as the one that triggered the failure.
-  #   Kernel.srand config.seed
+  config.filter_run_when_matching :focus
+  config.example_status_persistence_file_path = "spec/examples.txt"
+  config.disable_monkey_patching!
+  config.warnings = true
+  config.order = :random
+  Kernel.srand config.seed
 end