Detect a slow raidz child during reads

include/sys/fs/zfs.h

@@ -379,6 +379,7 @@ typedef enum {
 	VDEV_PROP_TRIM_SUPPORT,
 	VDEV_PROP_TRIM_ERRORS,
 	VDEV_PROP_SLOW_IOS,
+	VDEV_PROP_SIT_OUT,
 	VDEV_NUM_PROPS
 } vdev_prop_t;
 

include/sys/vdev_impl.h

@@ -285,6 +285,7 @@ struct vdev {
 	boolean_t	vdev_ishole;	/* is a hole in the namespace	*/
 	uint64_t	vdev_top_zap;
 	vdev_alloc_bias_t vdev_alloc_bias; /* metaslab allocation bias	*/
+	uint64_t	vdev_last_latency_check;
 
 	/* pool checkpoint related */
 	space_map_t	*vdev_checkpoint_sm;	/* contains reserved blocks */
@@ -432,6 +433,9 @@ struct vdev {
 	hrtime_t	vdev_mmp_pending; /* 0 if write finished	*/
 	uint64_t	vdev_mmp_kstat_id;	/* to find kstat entry */
 	uint64_t	vdev_expansion_time;	/* vdev's last expansion time */
+	uint64_t	vdev_outlier_count;	/* read outlier amongst peers */
+	uint64_t	vdev_ewma_latency; /* moving average read latency */
+	hrtime_t	vdev_read_sit_out_expire; /* end of sit out period    */
 	list_node_t	vdev_leaf_node;		/* leaf vdev list */
 
 	/*

include/sys/vdev_raidz.h

@@ -60,6 +60,7 @@ void vdev_raidz_checksum_error(zio_t *, struct raidz_col *, abd_t *);
 struct raidz_row *vdev_raidz_row_alloc(int, zio_t *);
 void vdev_raidz_reflow_copy_scratch(spa_t *);
 void raidz_dtl_reassessed(vdev_t *);
+boolean_t vdev_sit_out_reads(vdev_t *, zio_flag_t);
 
 extern const zio_vsd_ops_t vdev_raidz_vsd_ops;
 

include/sys/vdev_raidz_impl.h

@@ -118,6 +118,7 @@ typedef struct raidz_col {
 	uint8_t rc_need_orig_restore:1;	/* need to restore from orig_data? */
 	uint8_t rc_force_repair:1;	/* Write good data to this column */
 	uint8_t rc_allow_repair:1;	/* Allow repair I/O to this column */
+	uint8_t rc_latency_outlier:1;	/* Latency outlier for this device */
 	int rc_shadow_devidx;		/* for double write during expansion */
 	int rc_shadow_error;		/* for double write during expansion */
 	uint64_t rc_shadow_offset;	/* for double write during expansion */
@@ -132,6 +133,7 @@ typedef struct raidz_row {
 	int rr_firstdatacol;		/* First data column/parity count */
 	abd_t *rr_abd_empty;		/* dRAID empty sector buffer */
 	int rr_nempty;			/* empty sectors included in parity */
+	int rr_outlier_cnt;		/* Count of latency outlier devices */
 #ifdef ZFS_DEBUG
 	uint64_t rr_offset;		/* Logical offset for *_io_verify() */
 	uint64_t rr_size;		/* Physical size for *_io_verify() */

lib/libzfs/libzfs.abi

@@ -5917,7 +5917,8 @@
       <enumerator name='VDEV_PROP_TRIM_SUPPORT' value='49'/>
       <enumerator name='VDEV_PROP_TRIM_ERRORS' value='50'/>
       <enumerator name='VDEV_PROP_SLOW_IOS' value='51'/>
-      <enumerator name='VDEV_NUM_PROPS' value='52'/>
+      <enumerator name='VDEV_PROP_SIT_OUT' value='52'/>
+      <enumerator name='VDEV_NUM_PROPS' value='53'/>
     </enum-decl>
     <typedef-decl name='vdev_prop_t' type-id='1573bec8' id='5aa5c90c'/>
     <class-decl name='zpool_load_policy' size-in-bits='256' is-struct='yes' visibility='default' id='2f65b36f'>

lib/libzfs/libzfs_pool.c

@@ -5478,6 +5478,8 @@ zpool_get_vdev_prop_value(nvlist_t *nvprop, vdev_prop_t prop, char *prop_name,
 			/* Only use if provided by the RAIDZ VDEV above */
 			if (prop == VDEV_PROP_RAIDZ_EXPANDING)
 				return (ENOENT);
+			if (prop == VDEV_PROP_SIT_OUT)
+				return (ENOENT);
 		}
 		if (vdev_prop_index_to_string(prop, intval,
 		    (const char **)&strval) != 0)

man/man4/zfs.4

@@ -591,6 +591,18 @@ new format when enabling the
 feature.
 The default is to convert all log entries.
 .
+.It Sy vdev_read_sit_out_secs Ns = Ns Sy 600 Ns s Po 10 min Pc Pq ulong
+When a slow disk outlier is detected it is placed in a sit out state.
+While sitting out the disk will not participate in normal reads, instead its
+data will be reconstructed as needed from parity.
+Resilver and scrub operations will always read from a disk, even if it's
+sitting out.
+Only a single disk in a RAID-Z or dRAID vdev may sit out at the same time.
+Writes will still be issued to a disk which is sitting out to maintain full
+redundancy.
+Defaults to 600 seconds and a value of zero disables slow disk outlier
+detection.
+.
 .It Sy vdev_removal_max_span Ns = Ns Sy 32768 Ns B Po 32 KiB Pc Pq uint
 During top-level vdev removal, chunks of data are copied from the vdev
 which may include free space in order to trade bandwidth for IOPS.

man/man7/vdevprops.7

@@ -104,12 +104,23 @@ Comma separated list of children of this vdev
 The number of children belonging to this vdev
 .It Sy read_errors , write_errors , checksum_errors , initialize_errors , trim_errors
 The number of errors of each type encountered by this vdev
+.It Sy sit_out
+True when a slow disk outlier was detected and the vdev is currently in a sit
+out state.
+While sitting out, the vdev will not participate in normal reads, instead its
+data will be reconstructed as needed from parity.
 .It Sy slow_ios
-The number of slow I/Os encountered by this vdev,
-These represent I/O operations that didn't complete in
+This indicates the number of slow I/O operations encountered by this vdev.
+A slow I/O is defined as an operation that did not complete within the
 .Sy zio_slow_io_ms
-milliseconds
+threshold in milliseconds
 .Pq Sy 30000 No by default .
+For
+.Sy RAIDZ
+and
+.Sy DRAID
+configurations, this value also represents the number of times the vdev was
+identified as an outlier and excluded from participating in read I/O operations.
 .It Sy null_ops , read_ops , write_ops , free_ops , claim_ops , trim_ops
 The number of I/O operations of each type performed by this vdev
 .It Xo

module/zcommon/zpool_prop.c

@@ -466,6 +466,9 @@ vdev_prop_init(void)
 	zprop_register_index(VDEV_PROP_RAIDZ_EXPANDING, "raidz_expanding", 0,
 	    PROP_READONLY, ZFS_TYPE_VDEV, "on | off", "RAIDZ_EXPANDING",
 	    boolean_table, sfeatures);
+	zprop_register_index(VDEV_PROP_SIT_OUT, "sit_out", 0,
+	    PROP_READONLY, ZFS_TYPE_VDEV, "on | off", "SIT_OUT", boolean_table,
+	    sfeatures);
 	zprop_register_index(VDEV_PROP_TRIM_SUPPORT, "trim_support", 0,
 	    PROP_READONLY, ZFS_TYPE_VDEV, "on | off", "TRIMSUP",
 	    boolean_table, sfeatures);

module/zfs/vdev.c

@@ -4521,6 +4521,8 @@ vdev_clear(spa_t *spa, vdev_t *vd)
 	vd->vdev_stat.vs_checksum_errors = 0;
 	vd->vdev_stat.vs_dio_verify_errors = 0;
 	vd->vdev_stat.vs_slow_ios = 0;
+	atomic_store_64(&vd->vdev_outlier_count, 0);
+	vd->vdev_read_sit_out_expire = 0;
 
 	for (int c = 0; c < vd->vdev_children; c++)
 		vdev_clear(spa, vd->vdev_child[c]);
@@ -6361,6 +6363,19 @@ vdev_prop_get(vdev_t *vd, nvlist_t *innvl, nvlist_t *outnvl)
 					    ZPROP_SRC_NONE);
 				}
 				continue;
+			case VDEV_PROP_SIT_OUT:
+				/* Only expose this for a draid or raidz leaf */
+				if (vd->vdev_ops->vdev_op_leaf &&
+				    vd->vdev_top != NULL &&
+				    (vd->vdev_top->vdev_ops ==
+				    &vdev_raidz_ops ||
+				    vd->vdev_top->vdev_ops ==
+				    &vdev_draid_ops)) {
+					vdev_prop_add_list(outnvl, propname,
+					    NULL, vdev_sit_out_reads(vd, 0),
+					    ZPROP_SRC_NONE);
+				}
+				continue;
 			case VDEV_PROP_TRIM_SUPPORT:
 				/* only valid for leaf vdevs */
 				if (vd->vdev_ops->vdev_op_leaf) {

module/zfs/vdev_draid.c

@@ -1993,6 +1993,31 @@ vdev_draid_io_start_read(zio_t *zio, raidz_row_t *rr)
 				rc->rc_force_repair = 1;
 				rc->rc_allow_repair = 1;
 			}
+		} else if (vdev_sit_out_reads(cvd, zio->io_flags)) {
+			rr->rr_outlier_cnt++;
+			ASSERT0(rc->rc_latency_outlier);
+			rc->rc_latency_outlier = 1;
+		}
+	}
+
+	/*
+	 * When the row contains a latency outlier and sufficient parity
+	 * exists to reconstruct the column data, then skip reading the
+	 * known slow child vdev as a performance optimization.
+	 */
+	if (rr->rr_outlier_cnt > 0 &&
+	    (rr->rr_firstdatacol - rr->rr_missingparity) >=
+	    (rr->rr_missingdata + 1)) {
+
+		for (int c = rr->rr_cols - 1; c >= rr->rr_firstdatacol; c--) {
+			raidz_col_t *rc = &rr->rr_col[c];
+
+			if (rc->rc_error == 0 && rc->rc_latency_outlier) {
+				rr->rr_missingdata++;
+				rc->rc_error = SET_ERROR(EAGAIN);
+				rc->rc_skipped = 1;
+				break;
+			}
 		}
 	}