Adds additional parts docs to OHAI

docs/diy-components/6A-power-supply-with-cord/index.md

@@ -1 +1,42 @@
-# 
+# LumenPnP 24vDC 6A Power Supply
+
+## Purpose
+
+The purpose of this work instructions is to document the assembly process for the `LumenPnP 24vDC 6A Power Supply`.
+
+## Instructions
+
+- Collect the following items from inventory:
+
+    - 1x `24vDC 6A Power Supply`
+    - 1x `N515-C13-PWR-CBL`
+
+        !!!info "This is nerd-speak for USA-style 3-prong power cord"
+
+    - 1x `6x9-bag`
+    - 1x `product-label`
+    - 1x `build-number-sticker`
+
+    ![alt text](img/IMG_0797.jpg)
+
+- Adhere a `product-label` to the `6x9-bag`
+
+    ![alt text](img/IMG_0799.jpg)
+    ![alt text](img/IMG_0800.jpg)
+
+- Unbox the `24vDC 6A Power Supply`
+
+    ![alt text](img/IMG_0798.jpg)
+
+- Place a `24vDC 6A Power Supply` and `N515-C13-PWR-CBL` into the `6x9-bag` before sealing it shut
+
+    ![alt text](img/IMG_0801.jpg)
+    ![alt text](img/IMG_0802.jpg)
+    ![alt text](img/IMG_0803.jpg)
+
+- Adhere a `build-number-sticker` to the `product-label` as shown in the image below
+
+    ![alt text](img/IMG_0804.jpg)
+
+!!!success "The `LumenPnP 24vDC 6A Power Supply` is now ready for packout!"
+    ![alt text](img/IMG_0805.jpg)

docs/diy-components/MGN12H-linear-rail-kit/index.md

@@ -1 +1,12 @@
-# 
+# LumenPnP MGN12H Linear Rail Kit
+
+## Purpose
+
+The purpose of this work instructions is to document the assembly process for the `LumenPnP MGN12H Linear Rail Kit`.
+
+## Instructions
+
+- Collect the following items from inventory:
+
+!!!success "The `LumenPnP MGN12H Linear Rail Kit` is now ready for packout!"
+    ![alt text](img/

docs/diy-components/NEMA-17-stepper-motor 4-pack/index.md

@@ -1 +1,17 @@
-# 
+# LumenPnP NEMA 17 Stepper Motor 4-Pack
+
+## Purpose
+
+The purpose of this work instructions is to document the assembly process for the `LumenPnP NEMA 17 Stepper Motor 4-Pack`.
+
+## Instructions
+
+![alt text](img/IMG_0751.jpg)
+![alt text](img/IMG_0752.jpg)
+![alt text](img/IMG_0753.jpg)
+![alt text](img/IMG_0754.jpg)
+![alt text](img/IMG_0755.jpg)
+![alt text](img/IMG_0757.jpg)
+![alt text](img/IMG_0758.jpg)
+![alt text](img/IMG_0763-1.jpg)
+![alt text](img/IMG_0763-2.jpg)

docs/diy-components/datum-board-kit/index.md

@@ -1 +1,31 @@
-# 
+# LumenPnP Datum Board Kit
+
+## Purpose
+
+The purpose of this work instructions is to document the assembly process for the `LumenPnP Datum Board Kit`.
+
+## Instructions
+
+- Collect the following items from inventory:
+
+    - 1x `datum-board`
+    - 1x `3x4-bag`
+    - 1x `opulo-sticker`
+    - 1x `product-label`
+    - 1x `build-number-sticker`
+
+    ![alt text](img/IMG_0807.jpg)
+
+- Place a `datum-board` and `opulo-sticker` into the `3x4-bag` before sealing it closed
+
+    ![alt text](img/IMG_0808.jpg)
+
+- Adhere the `product-label` to the outside of the `3x4-bag`
+
+    ![alt text](img/IMG_0809.jpg)
+
+- Adhere a `build-number-sticker` to the `product-label`
+
+    ![alt text](img/IMG_0810.jpg)
+
+!!!success "The `LumenPnP Datum Board Kit` is now ready for packout!"

docs/diy-components/frame-kit/index.md

@@ -6,14 +6,83 @@ The purpose of this work instructions is to document the assembly process for th
 
 ## Instructions
 
+- Collect required components:
+    - 8x `rubber-feet`
+    - 7x `alu-extusion`
+    - 1x `2x3-bag`
+    - 1x `3x6-bag`
+    - 1x `product-label`
+    - 1x `build-number-sticker`
+    - 1x `26x4x2-box` (not shown)
+    - 4x sheets of bubble wrap
+
+        !!!info "This is the box we use for staging plates"
+
+    ![alt text](img/IMG_0769.jpg)
+
 - Create `frame-kit-bagged-component-set`
-    - Collect a `3x6-bag` and open it
-    - Collect 6x `corner-backet` and place them into the `3x6-bag`
-    - Collect 8x `rubber-feet` and place them into the same `3x6-bag`
-    - Seal the `3x6-bag` shut
-- Collect a `boxed-6pcs-alu-extrusion-set`
-- Tape or rubber band `frame-kit-bagged-component-set` to `boxed-6pcs-alu-extrusion-set`
+    - Place 8x `rubber-feet` into a `2x3-bag`
+
+        ![alt text](img/IMG_0770.jpg)
+        ![alt text](img/IMG_0771.jpg)
+
+    - Collect a `3x6-bag`, 6x `corner-backet`, and the bagged `rubber-feet` from the previous step
+
+        ![alt text](img/IMG_0772.jpg)
+
+    - Place all 6x `corner-backet` into the `3x6-bag`
+
+        ![alt text](img/IMG_0773.jpg)
+
+    - Place the bagged `rubber-feet` into the same `3x6-bag` before sealing it shut
+
+        ![alt text](img/IMG_0774.jpg)
+
+- Fold up a `26x4x2-box` and gather the required bubble wrap
+
+    ![alt text](img/IMG_0775.jpg)
+
+- Place 2 sheets of bubble wrap into the box matching the image below
+
+    ![alt text](img/IMG_0776.jpg)
+
+- Place 7x `alu-extusion` into the box
+
+    ![alt text](img/IMG_0777.jpg)
+
+- Roll up the excess bubble wrap and tuck it into the 2" gap on the right-side of the open box
+
+    ![alt text](img/IMG_0778.jpg)
+    ![alt text](img/IMG_0780.jpg)
+
+- Fold the loose bubble wrap on the left side of the box to be atop the `alu-exrusion` pieces
+
+    ![alt text](img/IMG_0781.jpg)
+
+- Tuck a sheet of bubble wrap between the first piece of `alu-extrusion` and the box's flap before folding it over the product
+
+    ![alt text](img/IMG_0782.jpg)
+    ![alt text](img/IMG_0783.jpg)
+
+- Place an additonal sheet of bubble wrap atop the packaged `alu-extrusion` before addding the `frame-kit-bagged-component-set` atop the rolled up section of bubble wrap
+
+    ![alt text](img/IMG_0784.jpg)
+
+- Close the box and tape it shut with 3" packaging tape
+    - Use 3 equally spaced tape wraps around the narrow portion of the box
+    - Use 1 tape warp around the entirety of the long portion of the box
+
+    ![alt text](img/IMG_0785.jpg)
+    ![alt text](img/IMG_0786.jpg)
+
 - Adhere a `product-sticker` to `LumenPnP Frame Kit`
+
+    ![alt text](img/IMG_0787.jpg)
+    ![alt text](img/IMG_0788.jpg)
+
 - Adhere a `build-number-sticker` to `LumenPnP Frame Kit`
 
+    ![alt text](img/IMG_0789.jpg)
+
 !!!success "Set the completed `LumenPnP Frame Kit` aside for pack out"
+      ![alt text](img/IMG_0790.jpg)

docs/diy-components/index.md

@@ -4,4 +4,4 @@ This section of Opulo OHAI is dedicated to the various DIY components and kits w
 
 ## Build # Sticker Requirements
 
-- Please be sure that each product produced has a Aligni Build # Sticker adhered
+- Please be sure that each product produced has a `build-number-sticker` adhered