OK the boards have been refined some more and should be good to go.
The through hole pbcb needs to be hand finished with a file
- I recommend printing either these with a board thickness no bigger than 0.8mm. Flex PCB would be best as it's the thinnest.
- I highly recommend having the resistors put on by the pcb fab if available.
- I increased the lettering size so it should come out readable
- I moved the pads a little more towards the holes on the pbcb so there should be no exposed copper once filed down
- Got rid of the pads on the back side of the pbcb as they were getting in the way