Skip to content

Commit

Permalink
init
Browse files Browse the repository at this point in the history
  • Loading branch information
@ppkt
ppkt committed Dec 26, 2014
0 parents commit 52818c9
Show file tree
Hide file tree
Showing 21 changed files with 22,622 additions and 0 deletions.
1,612 changes: 1,612 additions & 0 deletions cmsis/core_cm3.h

Large diffs are not rendered by default.

616 changes: 616 additions & 0 deletions cmsis/core_cmFunc.h

Large diffs are not rendered by default.

618 changes: 618 additions & 0 deletions cmsis/core_cmInstr.h

Large diffs are not rendered by default.

289 changes: 289 additions & 0 deletions cmsis_boot/startup/startup_stm32f10x_md_vl.c
Original file line number Diff line number Diff line change
@@ -0,0 +1,289 @@
/**
******************************************************************************
* @file startup_stm32f10x_md_vl.c
* @author Coocox
* @version V1.0
* @date 3/4/2011
* @brief STM32F10x Medium Density Value Line Devices Startup code.
* This module performs:
* - Set the initial SP
* - Set the vector table entries with the exceptions ISR address
* - Initialize data and bss
* - Setup the microcontroller system.
* - Call the application's entry point.
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
*******************************************************************************
*/


/*----------Stack Configuration-----------------------------------------------*/
#define STACK_SIZE 0x00000100 /*!< The Stack size suggest using even number */
__attribute__ ((section(".co_stack")))
unsigned long pulStack[STACK_SIZE];


/*----------Macro definition--------------------------------------------------*/
#define WEAK __attribute__ ((weak))


/*----------Declaration of the default fault handlers-------------------------*/
/* System exception vector handler */
__attribute__ ((used))
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_TIM15_IRQHandler(void);
void WEAK TIM1_UP_TIM16_IRQHandler(void);
void WEAK TIM1_TRG_COM_TIM17_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK TIM4_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK I2C2_EV_IRQHandler(void);
void WEAK I2C2_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK SPI2_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK USART3_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK CEC_IRQHandler(void);
void WEAK TIM6_DAC_IRQHandler(void);
void WEAK TIM7_IRQHandler(void);

/*----------Symbols defined in linker script----------------------------------*/
extern unsigned long _sidata; /*!< Start address for the initialization
values of the .data section. */
extern unsigned long _sdata; /*!< Start address for the .data section */
extern unsigned long _edata; /*!< End address for the .data section */
extern unsigned long _sbss; /*!< Start address for the .bss section */
extern unsigned long _ebss; /*!< End address for the .bss section */
extern void _eram; /*!< End address for ram */


/*----------Function prototypes-----------------------------------------------*/
extern int main(void); /*!< The entry point for the application. */
extern void SystemInit(void); /*!< Setup the microcontroller system(CMSIS) */
void Default_Reset_Handler(void); /*!< Default reset handler */
static void Default_Handler(void); /*!< Default exception handler */


/**
*@brief The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x00000000.
*/
__attribute__ ((used,section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{
/*----------Core Exceptions-------------------------------------------------*/
(void *)&pulStack[STACK_SIZE], /*!< The initial stack pointer */
Reset_Handler, /*!< Reset Handler */
NMI_Handler, /*!< NMI Handler */
HardFault_Handler, /*!< Hard Fault Handler */
MemManage_Handler, /*!< MPU Fault Handler */
BusFault_Handler, /*!< Bus Fault Handler */
UsageFault_Handler, /*!< Usage Fault Handler */
0,0,0,0, /*!< Reserved */
SVC_Handler, /*!< SVCall Handler */
DebugMon_Handler, /*!< Debug Monitor Handler */
0, /*!< Reserved */
PendSV_Handler, /*!< PendSV Handler */
SysTick_Handler, /*!< SysTick Handler */

/*----------External Exceptions---------------------------------------------*/
WWDG_IRQHandler, /*!< 0: Window Watchdog */
PVD_IRQHandler, /*!< 1: PVD through EXTI Line detect */
TAMPER_IRQHandler, /*!< 2: Tamper */
RTC_IRQHandler, /*!< 3: RTC */
FLASH_IRQHandler, /*!< 4: Flash */
RCC_IRQHandler, /*!< 5: RCC */
EXTI0_IRQHandler, /*!< 6: EXTI Line 0 */
EXTI1_IRQHandler, /*!< 7: EXTI Line 1 */
EXTI2_IRQHandler, /*!< 8: EXTI Line 2 */
EXTI3_IRQHandler, /*!< 9: EXTI Line 3 */
EXTI4_IRQHandler, /*!< 10: EXTI Line 4 */
DMA1_Channel1_IRQHandler, /*!< 11: DMA1 Channel 1 */
DMA1_Channel2_IRQHandler, /*!< 12: DMA1 Channel 2 */
DMA1_Channel3_IRQHandler, /*!< 13: DMA1 Channel 3 */
DMA1_Channel4_IRQHandler, /*!< 14: DMA1 Channel 4 */
DMA1_Channel5_IRQHandler, /*!< 15: DMA1 Channel 5 */
DMA1_Channel6_IRQHandler, /*!< 16: DMA1 Channel 6 */
DMA1_Channel7_IRQHandler, /*!< 17: DMA1 Channel 7 */
ADC1_IRQHandler, /*!< 18: ADC1 */
0, /*!< 19: USB High Priority or CAN1 TX */
0, /*!< 20: USB Low Priority or CAN1 RX0 */
0, /*!< 21: CAN1 RX1 */
0, /*!< 22: CAN1 SCE */
EXTI9_5_IRQHandler, /*!< 23: EXTI Line 9..5 */
TIM1_BRK_TIM15_IRQHandler, /*!< 24: TIM1 Break and TIM15 */
TIM1_UP_TIM16_IRQHandler, /*!< 25: TIM1 Update and TIM16 */
TIM1_TRG_COM_TIM17_IRQHandler,/*!< 26: TIM1 Trigger and Commutation and TIM17 */
TIM1_CC_IRQHandler, /*!< 27: TIM1 Capture Compare */
TIM2_IRQHandler, /*!< 28: TIM2 */
TIM3_IRQHandler, /*!< 29: TIM3 */
TIM4_IRQHandler, /*!< 30: TIM4 */
I2C1_EV_IRQHandler, /*!< 31: I2C1 Event */
I2C1_ER_IRQHandler, /*!< 32: I2C1 Error */
I2C2_EV_IRQHandler, /*!< 33: I2C2 Event */
I2C2_ER_IRQHandler, /*!< 34: I2C2 Error */
SPI1_IRQHandler, /*!< 35: SPI1 */
SPI2_IRQHandler, /*!< 36: SPI2 */
USART1_IRQHandler, /*!< 37: USART1 */
USART2_IRQHandler, /*!< 38: USART2 */
USART3_IRQHandler, /*!< 39: USART3 */
EXTI15_10_IRQHandler, /*!< 40: EXTI Line 15..10 */
RTCAlarm_IRQHandler, /*!< 41: RTC Alarm through EXTI Line */
CEC_IRQHandler, /*!< 42: HDMI-CEC */
0,0,0,0,0,0, /*!< Reserved */
0,0,0,0,0, /*!< Reserved */
TIM6_DAC_IRQHandler, /*!< 54: TIM6 and DAC underrun */
TIM7_IRQHandler, /*!< 55: TIM7 */
(void *)0xF108F85F /*!< Boot in RAM mode */
};


/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval None
*/
void Default_Reset_Handler(void)
{
/* Initialize data and bss */
unsigned long *pulSrc, *pulDest;

/* Copy the data segment initializers from flash to SRAM */
pulSrc = &_sidata;

for(pulDest = &_sdata; pulDest < &_edata; )
{
*(pulDest++) = *(pulSrc++);
}

/* Zero fill the bss segment. This is done with inline assembly since this
will clear the value of pulDest if it is not kept in a register. */
__asm(" ldr r0, =_sbss\n"
" ldr r1, =_ebss\n"
" mov r2, #0\n"
" .thumb_func\n"
" zero_loop:\n"
" cmp r0, r1\n"
" it lt\n"
" strlt r2, [r0], #4\n"
" blt zero_loop");

/* Setup the microcontroller system. */
SystemInit();

/* Call the application's entry point.*/
main();
}

/**
*@brief Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*/
#pragma weak Reset_Handler = Default_Reset_Handler
#pragma weak NMI_Handler = Default_Handler
#pragma weak HardFault_Handler = Default_Handler
#pragma weak MemManage_Handler = Default_Handler
#pragma weak BusFault_Handler = Default_Handler
#pragma weak UsageFault_Handler = Default_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_TIM15_IRQHandler = Default_Handler
#pragma weak TIM1_UP_TIM16_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_TIM17_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak TIM4_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak I2C2_EV_IRQHandler = Default_Handler
#pragma weak I2C2_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak SPI2_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak USART3_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak CEC_IRQHandler = Default_Handler
#pragma weak TIM6_DAC_IRQHandler = Default_Handler
#pragma weak TIM7_IRQHandler = Default_Handler

/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop,
* preserving the system state for examination by a debugger.
* @param None
* @retval None
*/
static void Default_Handler(void)
{
/* Go into an infinite loop. */
while (1)
{
}
}

/*********************** (C) COPYRIGHT 2011 Coocox ************END OF FILE*****/
Loading

0 comments on commit 52818c9

Please sign in to comment.