Use Arc features in datasource extensions for eager startup and active/inactive

[yrodiere]

Based on #41810 , which must be merged first. => Done

Best reviewed commit by commit.

Effects of this PR:

1. Fixes Health check on io.quarkus.agroal.runtime.UnconfiguredDataSource always reports healthy #36666: see changes in expected behavior in *DatasourceHealthCheckTest.java for Agroal.
2. Fixes Reactive datasource should not have a default for quarkus.datasource.reactive.url #43517: see changes in expected behavior in *DatasourceHealthCheckTest.java and *ConfigUrlMissing*Test.java for reactive SQL client extensions.
3. Improves error messages when an application attempts to statically inject or dynamically access a Datasource bean that is deactivated and/or has no URL set.
4. Introduces a few (arguably beneficial) breaking changes, see below.

Content to be added to the migration guide:

== Datasources

[[datasource-no-default-url]]
=== No default URL for Reactive SQL clients

In previous versions of Quarkus, when dev services were disabled, or when running in production mode, `quarkus.datasource.reactive.url`/`quarkus.datasource."datasource-name".reactive.url`  would be implicitly set to an undocumented default targeting `localhost` and a DB-specific port.

Starting with this version of Quarkus, when dev services are disabled, or when running in production mode, `quarkus.datasource.reactive.url`/`quarkus.datasource."datasource-name".reactive.url` no longer has a default: if the property is not set, the corresponding datasource will be deactivated, leading to the behavior described in <<datasource-inactive-fail-fast>>.

If your application needs to target localhost for one of its datasources, set `quarkus.datasource.reactive.url`/`quarkus.datasource."datasource-name".reactive.url` explicitly, for example in `application.properties`.

[[datasource-no-health-check-if-no-url]]
=== Datasources without a URL no longer contribute a health check

In previous versions of Quarkus, when dev services were disabled, or when running in production mode, and when `quarkus.datasource.reactive.url`/`quarkus.datasource."datasource-name".reactive.url` was not set, a health check would be contributed for the corresponding datasource regardless, resulting in unreliable health checks that would either always succeed (JDBC datasource) or (almost) always fail (reactive datasources).

Starting with this version of Quarkus, datasources without a URL will no longer contribute a health check.

If your application needs a health check for a datasource, make sure to set `quarkus.datasource.jdbc.url`/`quarkus.datasource."datasource-name".jdbc.url`/`quarkus.datasource.reactive.url`/`quarkus.datasource."datasource-name".reactive.url` explicitly.

NOTE: Quarkus will still attempt to detect misconfiguration on application startup, but will report it differently, potentially earlier: see <<datasource-inactive-fail-fast>>.

[[datasource-inactive-fail-fast]]
=== Datasource usage fails fast if datasource is deactivated or has no URL set

In previous versions of Quarkus, when dev services were disabled, or when running in production mode, and when the datasource was deactivated (`quarkus.datasource.active=false`) or had no URL set, the application would be allowed to start successfully, but could fail much later upon first access to the datasource.

Starting with this version of Quarkus, datasources that are deactivated or do not have a URL will lead to a startup failure if Quarkus can detect they are used:

* Static CDI injection points involving the datasource (`@Inject DataSource ds` or `@Inject Pool pool`) will cause application startup to fail with an explicit, actionable message.
* Dynamic retrieval of the datasource (e.g. through `CDI.getBeanContainer()`/`Arc.instance()`, or by injecting an `Instance<DataSource>`) will not be detected on startup, but will cause an exception to be thrown with an explicit, actionable message.

The <<flyway-inactive-fail-fast,Flyway>> and <<liquibase-inactive-fail-fast,Liquibase>> extensions implement a similar behavior for their `Flyway`/`LiquibaseFactory` CDI beans.

If your application needs to inject a `DataSource`/`Flyway`/`LiquibaseFactory` bean for a datasource that can potentially be deactivated or have no URL, you may encounter a startup failure similar to this:

```
io.quarkus.arc.InactiveBeanException: Bean is not active: SYNTHETIC bean [class=io.agroal.api.AgroalDataSource, id=sqqLi56D50iCdXmOjyjPSAxbLu0]
Reason: Datasource '<default>' was deactivated automatically because its URL is not set. To activate the datasource, set configuration property 'quarkus.datasource.jdbc.url'. Refer to https://quarkus.io/guides/datasource for guidance.
To avoid this exception while keeping the bean inactive:
	- Configure all extensions consuming this bean as inactive as well, if they allow it, e.g. 'quarkus.someextension.active=false'
	- Make sure that custom code only accesses this bean if it is active
	- Inject the bean with 'Instance<io.agroal.api.AgroalDataSource>' instead of 'io.agroal.api.AgroalDataSource'
This bean is injected into:
	-io.quarkus.agroal.test.ConfigUrlMissingDefaultDatasourceStaticInjectionTest$MyBean#ds
	at io.agroal.api.AgroalDataSource_sqqLi56D50iCdXmOjyjPSAxbLu0_Synthetic_Bean.doCreate(Unknown Source)
	[...]
```

To avoid this failure, follow the instructions in the exception message.
In particular, consider injecting the problematic bean as an `InjectableInstance` (for example `@Inject InjectableInstance<DataSource> ds`) instead.
You can check whether that bean is active using `.getHandle().getBean().isActive().result()` on the `InjectableInstance`, and retrieve the bean instance using `InjectableInstance#get()`.
See https://quarkus.io/guides/datasource#datasource-active for an example of such a setup for `DataSource` beans -- the idea would be similar for a `Flyway`/`LiquibaseFactory` beans.

== Flyway

[[flyway-inactive-inactive-fail-fast]]
=== Flyway usage fails fast if datasource is deactivated or has no URL set

Starting with this version of Quarkus, datasources that are deactivated or have no URL set will lead to a startup failure if Quarkus can detect a `Flyway` bean is used for that datasource.

See the <<datasource-inactive-fail-fast,datasources,similar migration guide entry for datasources>> for more information.

== Liquibase

[[liquibase-inactive-if-no-url]]
=== Liquibase usage fails fast if datasource is deactivated or has no URL set

Starting with this version of Quarkus, datasources that are deactivated or have no URL set will lead to a startup failure if Quarkus can detect a `LiquibaseFactory` bean is used for that datasource.

See the <<datasource-inactive-fail-fast,datasources,similar migration guide entry for datasources>> for more information.

[quarkus-bot]

Thanks for your pull request!

Your pull request does not follow our editorial rules. Could you have a look?

• title should preferably start with an uppercase character (if it makes sense!)

_{This message is automatically generated by a bot.}

[quarkus-bot]

/cc @gsmet (hibernate-orm)

[yrodiere]

Actually I'll keep this as a draft... the base commit makes changes in Arc, which probably means the rebuild will be massive, even if I only need to test things related to datasources :/

[yrodiere]

Hey @Ladicek, FYI I made some progress here regarding integration with your work in #41810, but didn't find the time to finish before my PTO. Sorry... I'll resume my work when I'm back at the end of August.

I'd personally not bother merging #41810 until then, but feel free if you're in a rush and are okay with what you're seeing here so far. I guess we can always iterate later on.

See you!

[Ladicek]

@yrodiere Thanks, and no worries -- I have intentionally made #41810 a draft and there's no need to rush it in. I'll wait for more of your feedback, and maybe change the API a little bit before making it ready, we'll see. Enjoy your PTO!

[geoand]

@geoand (or @andrejpetras ?) could you please have a look at the impact on Liquibase?

Seems reasonable

[yrodiere]

I rebased on main and added documentation for the getActive() solution implemented by @Ladicek in #43803 .

Note the Hibernate ORM documentation is a bit awkward at the moment, but it's just because we haven't fixed #43594 yet.

Will merge in the next few days unless someone objects.

[quarkus-bot]

Status for workflow Quarkus Documentation CI

This is the status report for running Quarkus Documentation CI on commit 093b837.

✅ The latest workflow run for the pull request has completed successfully.

It should be safe to merge provided you have a look at the other checks in the summary.

Warning

There are other workflow runs running, you probably need to wait for their status before merging.

[quarkus-bot]

Status for workflow Quarkus CI

This is the status report for running Quarkus CI on commit 093b837.

✅ The latest workflow run for the pull request has completed successfully.

It should be safe to merge provided you have a look at the other checks in the summary.

You can consult the Develocity build scans.

---

Flaky tests - Develocity

⚙️ JVM Tests - JDK 21

📦 integration-tests/mongodb-panache

✖ io.quarkus.it.mongodb.panache.ReflectionFreeSerializationTest.testReactiveBookEntity - History

• com.fasterxml.jackson.databind.exc.MismatchedInputException: No content to map due to end-of-input at [Source: REDACTED (\StreamReadFeature.INCLUDE_SOURCE_IN_LOCATION` disabled); line: 1]-java.lang.RuntimeException`

java.lang.RuntimeException: 
com.fasterxml.jackson.databind.exc.MismatchedInputException: No content to map due to end-of-input
 at [Source: REDACTED (`StreamReadFeature.INCLUDE_SOURCE_IN_LOCATION` disabled); line: 1]
	at io.restassured.internal.path.json.mapping.JsonPathJackson2ObjectDeserializer.deserialize(JsonPathJackson2ObjectDeserializer.java:30)
	at io.restassured.path.json.mapping.JsonPathObjectDeserializer$deserialize.call(Unknown Source)
	at io.restassured.internal.mapping.Jackson2Mapper.deserialize(Jackson2Mapper.groovy:58)
	at io.restassured.mapper.ObjectMapper$deserialize.call(Unknown Source)
	at io.restassured.internal.mapping.ObjectMapping.parseWithJackson2(ObjectMapping.groovy:254)

[yrodiere]

@geoand or @gastaldi I will need one of you to approve; I'm afraid Marko's and Thomas' approvals are non-binding :)

EDIT: Please!

[geoand]

Rubber-stamped!

[yrodiere]

Merged! Thanks a lot to everyone involved :)

[yrodiere]

Also, I updated the 3.17 migration guide: https://github.com/quarkusio/quarkus/wiki/Migration-Guide-3.17#datasources

[geoand]

👍🏽