cortex-m-rt: Added _stack_start symbol for use with MSPLIM

cortex-m-rt/CHANGELOG.md

@@ -8,6 +8,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 ## [Unreleased]
 
 - MSRV is now Rust 1.61 to support syn verions >=2.0.68
+- The `_stack_end` symbol is added, e.g. for use with MSPLIM.
 
 ## [v0.7.4]
 

cortex-m-rt/link.x.in

@@ -185,6 +185,9 @@ SECTIONS
   /* Place the heap right after `.uninit` in RAM */
   PROVIDE(__sheap = __euninit);
 
+  /* Place stack end at the end of allocated RAM */
+  PROVIDE(_stack_end = __euninit);
+
   /* ## .got */
   /* Dynamic relocations are unsupported. This section is only used to detect relocatable code in
      the input files and raise an error if relocatable code is found */
@@ -229,6 +232,12 @@ If you have set _stack_start, check it's set to an address which is a multiple o
 If you haven't, stack starts at the end of RAM by default. Check that both RAM
 origin and length are set to multiples of 8 in the `memory.x` file.");
 
+ASSERT(_stack_end % 4 == 0, "
+BUG(cortex-m-rt): end of stack is not 4-byte aligned");
+
+ASSERT(_stack_start >= _stack_end, "
+ERROR(cortex-m-rt): stack end address is not below stack start.");
+
 /* # Position checks */
 
 /* ## .vector_table

cortex-m-rt/src/lib.rs

@@ -58,16 +58,20 @@
 //! }
 //! ```
 //!
-//! ### `_stack_start`
+//! ### `_stack_start` / `_stack_end`
 //!
-//! This optional symbol can be used to indicate where the call stack of the program should be
-//! placed. If this symbol is not used then the stack will be placed at the *end* of the `RAM`
-//! region -- the stack grows downwards towards smaller address. This is generally a sensible
-//! default and most applications will not need to specify `_stack_start`.
+//! The `_stack_start` optional symbol can be used to indicate where the call stack of the program
+//! should be placed. If this symbol is not used then the stack will be placed at the *end* of the
+//! `RAM` region -- the stack grows downwards towards smaller address. This is generally a sensible
+//! default and most applications will not need to specify `_stack_start`. The same goes for
+//! `_stack_end` which is automatically placed after the end of statically allocated RAM.
+//!
+//! **NOTE:** If you change `_stack_start`, make sure to also set `_stack_end` correctly to match
+//! new stack area.
 //!
 //! For Cortex-M, the `_stack_start` must always be aligned to 8 bytes, which is enforced by
 //! the linker script. If you override it, ensure that whatever value you set is a multiple
-//! of 8 bytes.
+//! of 8 bytes. The `_stack_end` is aligned to 4 bytes.
 //!
 //! This symbol can be used to place the stack in a different memory region, for example:
 //!
@@ -85,6 +89,7 @@
 //! }
 //!
 //! _stack_start = ORIGIN(CCRAM) + LENGTH(CCRAM);
+//! _stack_end = ORIGIN(CCRAM);
 //! ```
 //!
 //! ### `_stext`
@@ -187,7 +192,7 @@
 //!
 //! ## `paint-stack`
 //!
-//! Everywhere between `__sheap` and `___stack_start` is painted with the fixed value
+//! Everywhere between `__sheap` and `_stack_start` is painted with the fixed value
 //! `STACK_PAINT_VALUE`, which is `0xCCCC_CCCC`.
 //! You can then inspect memory during debugging to determine how much of the stack has been used -
 //! where the stack has been used the 'paint' will have been 'scrubbed off' and the memory will