overall: Initial WBS diagram #43

chapters/introduction.tex

@@ -24,7 +24,7 @@
 
 \chapter{Introduction} \label{ch:introduction}
 
-The FloripaSat-2 is a satellite project of a 2U CubeSat (10$\times$10$\times$22,70 cm). This nanosatellite is the sequence project of the FloripaSat-1 CubeSat \cite{floripasat}, both developed by SpaceLab \cite{spacelab}. This second project is being developed in partneship with INPE\nomenclature{\textbf{INPE}}{\textit{Instituto Nacional de Pesquisas Espaciais.}} (\textit{Instituto Nacional de Pesquisas Espaciais}), who is supplying the main payload of the mission: The EDC board (\textit{Environmental Data Collection}) \cite{edc}. This project is part of the ``GOLDS\nomenclature{\textbf{GOLDS}}{\textit{Global Open Collecting Data System}}'' constellation (``Global Open Collecting Data System''), a collaborative CubeSat constellation for environmental data collection planned as part of the Brazilian space program \cite{golds}.
+The FloripaSat-2 is a satellite project of a 2U CubeSat (10$\times$10$\times$22,70 cm). This nanosatellite is the sequence project of the FloripaSat-1 CubeSat \cite{floripasat}, both developed by SpaceLab \cite{spacelab}. This second project is being developed in partneship with INPE\nomenclature{\textbf{INPE}}{\textit{Instituto Nacional de Pesquisas Espaciais.}} (\textit{Instituto Nacional de Pesquisas Espaciais}), who is supplying the main payload of the mission: The EDC board (\textit{Environmental Data Collection}) \cite{edc}. This project is part of the ``GOLDS\nomenclature{\textbf{GOLDS}}{\textit{Global Open Collecting Data System.}}'' constellation (``Global Open Collecting Data System''), a collaborative CubeSat constellation for environmental data collection planned as part of the Brazilian space program \cite{golds}.
 
 This project started just after the launch of FloripaSat-I (first half of 2020) and is planned to be launched in 2022. Most of the embedded electronics is partially or totally based on the FloripaSat-I satellite, with the same and/or improved versions of the modules. In other words, this project has at some level a flight heritage.
 

chapters/overall.tex

@@ -38,6 +38,8 @@ \section{Product Tree}
 
 \subsection{Working Breakdown Structure}
 
+The Working Breaking Structure (WBS\nomenclature{\textbf{WBS}}{\textit{Working Breakdown Structure.}}) is presented as a diagram in \autoref{fig:wbs}. The WBS is divided in work-packages (WP\nomenclature{\textbf{WP}}{\textit{WP.}}) as can be seen in the diagram. The description of each WP is detailed below.
+
 \begin{figure}[!ht]
     \begin{center}
         \includegraphics[width=\textwidth]{figures/wbs.pdf}
@@ -47,43 +49,43 @@ \subsection{Working Breakdown Structure}
 \end{figure}
 
 \begin{itemize}
-    \item \textbf{WP0}:
-    \item \textbf{WP1}:
+    \item \textbf{WP0}: Management and preparation.
+    \item \textbf{WP1}: Architecture study and specification.
         \begin{itemize}
-            \item \textbf{WP1.0}:
-            \item \textbf{WP1.1}:
-            \item \textbf{WP1.2}:
+            \item \textbf{WP1.0}: Operation scenario definition.
+            \item \textbf{WP1.1}: Architecture definition.
+            \item \textbf{WP1.2}: Requirements definition.
         \end{itemize}
-    \item \textbf{WP2}:
+    \item \textbf{WP2}: Engineering and flight models definition
         \begin{itemize}
-            \item \textbf{WP2.0}:
-            \item \textbf{WP2.1}:
-            \item \textbf{WP2.2}:
-            \item \textbf{WP2.3}:
-            \item \textbf{WP2.4}:
+            \item \textbf{WP2.0}: Application design.
+            \item \textbf{WP2.1}: Platform design.
+            \item \textbf{WP2.2}: Application implementation.
+            \item \textbf{WP2.3}: Platform implementation.
+            \item \textbf{WP2.4}: Decoder implementation (EGSE).
         \end{itemize}
-    \item \textbf{WP3}:
+    \item \textbf{WP3}: Engineering model integration.
         \begin{itemize}
-            \item \textbf{WP3.0}:
-            \item \textbf{WP3.1}:
-            \item \textbf{WP3.2}:
+            \item \textbf{WP3.0}: Subsystems integration and tests.
+            \item \textbf{WP3.1}: Engineering model satellite integration.
+            \item \textbf{WP3.2}: Integration and tests with decoder.
         \end{itemize}
-    \item \textbf{WP4}:
+    \item \textbf{WP4}: Engineering model validation.
         \begin{itemize}
-            \item \textbf{WP4.0}:
-            \item \textbf{WP4.1}:
+            \item \textbf{WP4.0}: Validation scenarios specification.
+            \item \textbf{WP4.1}: Project validation.
         \end{itemize}
-    \item \textbf{WP5}:
+    \item \textbf{WP5}: Fligth model integration.
         \begin{itemize}
-            \item \textbf{WP5.0}:
-            \item \textbf{WP5.1}:
+            \item \textbf{WP5.0}: Subsystems integration and tests.
+            \item \textbf{WP5.1}: Fligth model satellite integration.
         \end{itemize}
-    \item \textbf{WP6}:
+    \item \textbf{WP6}: Fligth model validation.
         \begin{itemize}
-            \item \textbf{WP6.0}:
-            \item \textbf{WP6.1}:
+            \item \textbf{WP6.0}: Validation scenarios specification.
+            \item \textbf{WP6.1}: Project validation.
         \end{itemize}
-    \item \textbf{WP7}:
+    \item \textbf{WP7}: Evaluation and dissemination.
 \end{itemize}
 
 \section{General Diagrams}