Skip to content

techmetx11/picodrive

 
 

Repository files navigation

This is my foray into dynamic recompilation using PicoDrive, a Megadrive / Genesis / Sega CD / Mega CD / 32X / SMS emulator.

I added support for MIPS (mips32r2), ARM64 (armv8), RISC-V (RV64IM) and PowerPC (G4/2.03) support to the SH2 recompiler, as well as spent much effort to optimize the DRC-generated code. I also optimized SH2 memory access inside the emulator, and did some work on M68K/SH2 CPU synchronization to fix some problems and speed up the emulator.

It got a bit out of hand. I ended up doing fixes and optimizations all over the place, mainly for 32X and CD, graphics handling, sound, and probably some more, see the commit history. As a result, 32X emulation speed has improved a lot, a lot of bugs were fixed, and some new features (e.g. chd file support) have been added.

compiling

I mainly worked with standalone PicoDrive versions as created by configure/make. A list of platforms for which this is possible can be obtained with

configure --help

If you want to build an executable for a unixoid platform not listed in the platform list, just use

configure --platform=generic

If DRC is available for the platform, it should be enabled automatically.

For other platforms using a cross-compiling toolchain I used this, assuming $TC points to the appropriate cross compile toolchain directory:

platform toolchain configure command
gp2x,wiz,caanoo open2x CROSS_COMPILE=arm-open2x-linux- CFLAGS="-I$TC/gcc-4.1.1-glibc-2.3.6/arm-open2x-linux/include" LDFLAGS="--sysroot $TC/gcc-4.1.1-glibc-2.3.6/arm-open2x-linux -L$TC/gcc-4.1.1-glibc-2.3.6/arm-open2x-linux/lib" ./configure --platform=gp2x
gp2x,wiz,caanoo open2x with ubuntu arm gcc 4.7 CROSS_COMPILE=arm-linux-gnueabi- CFLAGS="-I$TC/gcc-4.1.1-glibc-2.3.6/arm-open2x-linux/include" LDFLAGS="-B$TC/gcc-4.1.1-glibc-2.3.6/lib/gcc/arm-open2x-linux/4.1.1 -B$TC/gcc-4.1.1-glibc-2.3.6/arm-open2x-linux/lib -L$TC/gcc-4.1.1-glibc-2.3.6/arm-open2x-linux/lib" ./configure --platform=gp2x
dingux dingux CROSS_COMPILE=mipsel-linux- CFLAGS="-I$TC/usr/include -I$TC/usr/include/SDL" LDFLAGS="--sysroot $TC -L$TC/lib" ./configure --platform=dingux
dingux dingux with ubuntu mips gcc 5.4 CROSS_COMPILE=mipsel-linux-gnu- CFLAGS="-I$TC/usr/include -I$TC/usr/include/SDL" LDFLAGS="-B$TC/usr/lib -B$TC/lib -Wl,-rpath-link=$TC/usr/lib -Wl,-rpath-link=$TC/lib" ./configure --platform=dingux
retrofw retrofw CROSS_COMPILE=mipsel-linux- CFLAGS="-I $TC/include -I $TC/include/SDL -Wno-unused-result" LDFLAGS="--sysroot $TC/mipsel-buildroot-linux-uclibc/sysroot" ./configure --platform=retrofw
gcw0 gcw0 CROSS_COMPILE=mipsel-gcw0-linux-uclibc- CFLAGS="-I$TC/usr/mipsel-gcw0-linux-uclibc/sysroot/usr/include -I$TC/usr/mipsel-gcw0-linux-uclibc/sysroot/usr/include/SDL" LDFLAGS="--sysroot $TC/usr/mipsel-gcw0-linux-uclibc/sysroot" ./configure --platform=gcw0
rg350 rg350 CROSS_COMPILE=mipsel-linux- CFLAGS="-I$TC/usr/include -I$TC/usr/include/SDL" LDFLAGS="--sysroot $TC -L$TC/lib" ./configure --platform=rg350
miyoo miyoo CROSS_COMPILE=arm-miyoo-linux-uclibcgnueabi- CFLAGS="-I$TC/arm-miyoo-linux-uclibcgnueabi/sysroot/usr/include -I$TC/arm-miyoo-linux-uclibcgnueabi/sysroot/usr/include/SDL" LDFLAGS="--sysroot $TC/arm-miyoo-linux-uclibcgnueabi/sysroot" ./configure --platform=miyoo

For gp2x, wiz, and caanoo you may need to compile libpng first.

After configure, compile with

make

helix MP3 decoder for ARM

For 32 bit ARM platforms, there is the possibility to compile the helix MP3 decoder into a shared library to be able to use MP3 audio files with CD games. The helix source files aren't supplied because of licensing issues. However, if you have obtained the sources, put them into the platform/common/helix directory, set CROSS to your cross compiler prefix (e.g. arm-linux-gnueabi-) and LIBGCC to your cross compiler's libgcc.a (e.g. /usr/lib/gcc-cross/arm-linux-gnueabi/4.7/libgcc.a), and compile with

make -C platform/common/helix CROSS=$CROSS LIBGCC=$LIBGCC

Copy the resulting ${CROSS}helix_mp3.so as libhelix.so to the directory where the PicoDrive binary is.

installing

You need to install the resulting binary onto your device manually. For opendingux, gcw0, and rg350, copy the opk to your SD card. For gp2x, wiz, and caanoo, the easiest way is to unpack PicoDrive_191.zip on your SD card and replace the PicoDrive binary. For legacy dingux, unpack the dge zip and copy the files to your SD card.

Send bug reports, fixes etc to [email protected]

About

Fast MegaDrive/MegaCD/32X emulator

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 86.6%
  • Assembly 11.0%
  • HTML 1.1%
  • Makefile 0.8%
  • Shell 0.3%
  • Batchfile 0.2%