Fix unsatisfied dependencies by static Kconfig elements

boards/extensions/Kconfig.mimxrt1010_evk

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 TiaC Systems
+# SPDX-License-Identifier: Apache-2.0
+
+rsource "mimxrt1010_evk/Kconfig.defconfig"

boards/extensions/Kconfig.mimxrt1060_evk

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 TiaC Systems
+# SPDX-License-Identifier: Apache-2.0
+
+rsource "mimxrt1060_evk/Kconfig.defconfig"

boards/extensions/Kconfig.mimxrt1060_evkb

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 TiaC Systems
+# SPDX-License-Identifier: Apache-2.0
+
+rsource "mimxrt1060_evk/Kconfig.defconfig"

boards/extensions/Kconfig.nucleo_f767zi

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 TiaC Systems
+# SPDX-License-Identifier: Apache-2.0
+
+rsource "nucleo_f767zi/Kconfig.defconfig"

boards/extensions/Kconfig.rpi_pico

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 TiaC Systems
+# SPDX-License-Identifier: Apache-2.0
+
+rsource "rpi_pico/Kconfig.defconfig"

boards/extensions/Kconfig.rpi_pico_w

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 TiaC Systems
+# SPDX-License-Identifier: Apache-2.0
+
+rsource "rpi_pico/Kconfig.defconfig"

boards/extensions/Kconfig.seeeduino_xiao

@@ -0,0 +1,4 @@
+# Copyright (c) 2024 TiaC Systems
+# SPDX-License-Identifier: Apache-2.0
+
+rsource "seeeduino_xiao/Kconfig.defconfig"

boards/extensions/mimxrt1010_evk/Kconfig.defconfig

@@ -0,0 +1,73 @@
+# NXP MIMXRT1010-EVK board extended configuration
+
+# Copyright (c) 2024 TiaC Systems
+# SPDX-License-Identifier: Apache-2.0
+
+config USB_SELF_POWERED
+	default y
+	depends on USB_DEVICE_STACK && BOARD_MIMXRT1010_EVK
+
+config USB_MAX_POWER
+	default 0 if BOARD_MIMXRT1010_EVK	# 0mA (self powered)
+	depends on USB_DEVICE_STACK && BOARD_MIMXRT1010_EVK
+
+# Workaround for not being able to have commas in macro arguments
+DT_CHOSEN_Z_CONSOLE := zephyr,console
+DT_COMPAT_Z_CDC_ACM_UART := zephyr,cdc-acm-uart
+DT_COMPAT_NXP_USB := nxp,ehci
+
+# Macros to shorten Kconfig expressions
+DT_CHOSEN_CONSOLE_NODE := $(dt_chosen_path,$(DT_CHOSEN_Z_CONSOLE))
+DT_CHOSEN_CONSOLE_PARENT := $(dt_node_parent,$(DT_CHOSEN_CONSOLE_NODE))
+
+if BOARD_MIMXRT1010_EVK && \
+	$(dt_chosen_enabled,$(DT_CHOSEN_Z_CONSOLE)) && \
+	$(dt_compat_on_bus,$(DT_COMPAT_Z_CDC_ACM_UART),usb) && \
+	$(dt_node_has_compat,$(DT_CHOSEN_CONSOLE_PARENT),$(DT_COMPAT_NXP_USB))
+
+# Logger cannot use itself to log
+choice USB_CDC_ACM_LOG_LEVEL_CHOICE
+	default USB_CDC_ACM_LOG_LEVEL_OFF
+	depends on LOG
+endchoice
+
+# Set USB log level to error only
+choice USB_DEVICE_LOG_LEVEL_CHOICE
+	default USB_DEVICE_LOG_LEVEL_ERR
+	depends on LOG
+endchoice
+
+# Wait 4000ms at startup for logging
+config LOG_PROCESS_THREAD_STARTUP_DELAY_MS
+	default 4000
+	depends on LOG
+
+# Wait 4000ms at startup for USB enumeration on host side
+config BOOT_DELAY
+	default 4000
+
+endif # zephyr,cdc-acm-uart
+
+#
+# WARNINGS and NOTES for the disk name (CONFIG_MASS_STORAGE_DISK_NAME):
+#
+# 1. In principle, the disk name can be freely selected. If this is changed
+#    here in Kconfig, then the corresponding property "disk-name" in the
+#    corresponding Devicetree node with the compatibility "zephyr,flash-disk"
+#    must also be adapted. This should be improved in the future, as it
+#    represents double data storage.
+#
+# 2. If the FAT file system is used, the disk name defined here will also
+#    be used as the mountpoint. The currently used FATFS implementation
+#    automatically enters the disk name as mountpoint, which means that
+#    an application can only reach the correct disk via the exact same
+#    mountpoint name. Unfortunately, the current example application under
+#    "zephyr/samples/subsys/usb/mass" is hard-coded at this point and only
+#    expects the (disk) mountpoint name "NAND" and nothing else. This must
+#    be changed, as this implicitly represents a special configuration at
+#    source code level.
+#
+
+config MASS_STORAGE_DISK_NAME
+	default "NAND" if BOARD_MIMXRT1010_EVK
+	depends on USB_DEVICE_STACK && USB_MASS_STORAGE

boards/extensions/mimxrt1010_evk/doc/index.rst

@@ -23,23 +23,68 @@ List of extensions
 
   .. list-table::
      :align: left
-     :width: 25%
+     :width: 50%
+     :widths: 100
+
+     * - .. rubric:: NXP MIMXRT1010-EVK
+
+     * - .. literalinclude:: ../Kconfig.defconfig
+            :caption: Kconfig.defconfig
+            :language: Kconfig
+            :encoding: ISO-8859-1
+            :emphasize-lines: 1-2,5-6
+            :start-at: config USB_SELF_POWERED
+            :end-before: Workaround for not being able to have commas in macro arguments
+
+- :brd:`change` log level and startup delay only in case of use the
+  native USB device port :dtcompatible:`nxp,ehci` with CDC-ACM UART
+  :dtcompatible:`zephyr,cdc-acm-uart` as Zephyr console:
+
+  - :kconfig:option:`CONFIG_USB_CDC_ACM_LOG_LEVEL_CHOICE` :=
+    :kconfig:option:`CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF`
+  - :kconfig:option:`CONFIG_USB_DEVICE_LOG_LEVEL_CHOICE` :=
+    :kconfig:option:`CONFIG_USB_DEVICE_LOG_LEVEL_ERR`
+  - :kconfig:option:`CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS`
+  - :kconfig:option:`CONFIG_BOOT_DELAY`
+
+  .. list-table::
+     :align: left
+     :width: 50%
      :widths: 100
 
      * - .. rubric:: NXP MIMXRT1010-EVK
 
-     * - .. literalinclude:: ../mimxrt1010_evk.conf
-            :caption: mimxrt1010_evk.conf
-            :language: cfg
+     * - .. literalinclude:: ../Kconfig.defconfig
+            :caption: Kconfig.defconfig
+            :language: Kconfig
             :encoding: ISO-8859-1
-            :start-at: CONFIG_USB_SELF_POWERED
-            :end-at: CONFIG_USB_MAX_POWER
+            :emphasize-lines: 3-4,16-17,22-23,28-29,33-34
+            :start-at: Workaround for not being able to have commas in macro arguments
+            :end-at: endif # zephyr,cdc-acm-uart
 
 .. rubric:: Devicetree
 
+- set default entries for ``model`` and ``compatible`` of the boards:
+
+  .. list-table::
+     :align: left
+     :width: 50%
+     :widths: 100
+
+     * - .. rubric:: NXP MIMXRT1010-EVK
+
+     * - .. literalinclude:: ../mimxrt1010_evk.overlay
+            :caption: mimxrt1010_evk.overlay
+            :language: DTS
+            :encoding: ISO-8859-1
+            :prepend: / {
+            :start-at: model
+            :end-at: compatible
+            :append: };
+
 - overwrite the Arduino UNO R3 specific edge connecor binding
   :devicetree:`&arduino_header {...};` with additional closed
-  connections
+  connections:
 
   .. list-table::
      :align: left
@@ -86,7 +131,7 @@ List of extensions
   :devicetree:`partition = <&storage_partition>;` with the hard defined
   mass storage disk name :devicetree:`disk-name = "NAND";` – also set
   the mass storage disk name hard on Kconfig level by a new board config
-  file with :kconfig:option:`CONFIG_MASS_STORAGE_DISK_NAME`
+  file with :kconfig:option:`CONFIG_MASS_STORAGE_DISK_NAME`:
 
   .. list-table::
      :align: left
@@ -105,11 +150,11 @@ List of extensions
             :end-at: };
             :append: };
 
-         .. literalinclude:: ../mimxrt1010_evk.conf
-            :caption: mimxrt1010_evk.conf
-            :language: cfg
+         .. literalinclude:: ../Kconfig.defconfig
+            :caption: Kconfig.defconfig
+            :language: Kconfig
             :encoding: ISO-8859-1
-            :emphasize-lines: 21
             :prepend: #
-            :start-at: NOTES for the disk name (CONFIG_MASS_STORAGE_DISK_NAME):
-            :end-at: CONFIG_MASS_STORAGE_DISK_NAME=
+            :emphasize-lines: 21-22
+            :start-at: NOTES for the disk name (CONFIG_MASS_STORAGE_DISK_NAME)
+            :end-at: depends on USB_DEVICE_STACK && USB_MASS_STORAGE

boards/extensions/mimxrt1010_evk/mimxrt1010_evk.overlay

@@ -6,6 +6,14 @@
 #include "arduino_r3_connector.dtsi"
 
 / {
+	model = "NXP MIMXRT1010-EVK board @ UART Concole";
+	compatible = "nxp,mimxrt1010", "nxp,mimxrt1010-uartcons";
+
+	chosen {
+		zephyr,console = &lpuart1;
+		zephyr,shell-uart = &lpuart1;
+	};
+
 	msc_disk0 {
 		compatible = "zephyr,flash-disk";
 		partition = <&storage_partition>;

boards/extensions/mimxrt1060_evk/Kconfig.defconfig

@@ -0,0 +1,74 @@
+# NXP MIMXRT1060-EVK board extended configuration
+
+# Copyright (c) 2024 TiaC Systems
+# SPDX-License-Identifier: Apache-2.0
+
+config USB_SELF_POWERED
+	default y
+	depends on USB_DEVICE_STACK && (BOARD_MIMXRT1060_EVK || BOARD_MIMXRT1060_EVKB)
+
+config USB_MAX_POWER
+	default 0 if BOARD_MIMXRT1060_EVK	# 0mA (self powered)
+	default 0 if BOARD_MIMXRT1060_EVKB	# 0mA (self powered)
+	depends on USB_DEVICE_STACK && (BOARD_MIMXRT1060_EVK || BOARD_MIMXRT1060_EVKB)
+
+# Workaround for not being able to have commas in macro arguments
+DT_CHOSEN_Z_CONSOLE := zephyr,console
+DT_COMPAT_Z_CDC_ACM_UART := zephyr,cdc-acm-uart
+DT_COMPAT_NXP_USB := nxp,ehci
+
+# Macros to shorten Kconfig expressions
+DT_CHOSEN_CONSOLE_NODE := $(dt_chosen_path,$(DT_CHOSEN_Z_CONSOLE))
+DT_CHOSEN_CONSOLE_PARENT := $(dt_node_parent,$(DT_CHOSEN_CONSOLE_NODE))
+
+if (BOARD_MIMXRT1060_EVK || BOARD_MIMXRT1060_EVKB) && \
+	$(dt_chosen_enabled,$(DT_CHOSEN_Z_CONSOLE)) && \
+	$(dt_compat_on_bus,$(DT_COMPAT_Z_CDC_ACM_UART),usb) && \
+	$(dt_node_has_compat,$(DT_CHOSEN_CONSOLE_PARENT),$(DT_COMPAT_NXP_USB))
+
+# Logger cannot use itself to log
+choice USB_CDC_ACM_LOG_LEVEL_CHOICE
+	default USB_CDC_ACM_LOG_LEVEL_OFF
+	depends on LOG
+endchoice
+
+# Set USB log level to error only
+choice USB_DEVICE_LOG_LEVEL_CHOICE
+	default USB_DEVICE_LOG_LEVEL_ERR
+	depends on LOG
+endchoice
+
+# Wait 4000ms at startup for logging
+config LOG_PROCESS_THREAD_STARTUP_DELAY_MS
+	default 4000
+	depends on LOG
+
+# Wait 4000ms at startup for USB enumeration on host side
+config BOOT_DELAY
+	default 4000
+
+endif # zephyr,cdc-acm-uart
+
+#
+# WARNINGS and NOTES for the disk name (CONFIG_MASS_STORAGE_DISK_NAME):
+#
+# 1. In principle, the disk name can be freely selected. If this is changed
+#    here in Kconfig, then the corresponding property "disk-name" in the
+#    corresponding Devicetree node with the compatibility "zephyr,flash-disk"
+#    must also be adapted. This should be improved in the future, as it
+#    represents double data storage.
+#
+# 2. If the FAT file system is used, the disk name defined here will also
+#    be used as the mountpoint. The currently used FATFS implementation
+#    automatically enters the disk name as mountpoint, which means that
+#    an application can only reach the correct disk via the exact same
+#    mountpoint name. Unfortunately, the current example application under
+#    "zephyr/samples/subsys/usb/mass" is hard-coded at this point and only
+#    expects the (disk) mountpoint name "NAND" and nothing else. This must
+#    be changed, as this implicitly represents a special configuration at
+#    source code level.
+#
+
+config MASS_STORAGE_DISK_NAME
+	default "NAND" if (BOARD_MIMXRT1060_EVK || BOARD_MIMXRT1060_EVKB)
+	depends on USB_DEVICE_STACK && USB_MASS_STORAGE