Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/tests/bridle/common
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle repository).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/bridle/common/bridle.common/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/bridle/common/bridle.common/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/bridle/common/bridle.common/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/bridle/common/bridle.common/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice
Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/tests/bridle/common/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/bridle/common/bridle.common/zephyr/misc/generated/extra_kconfig_options.conf'

error: Aborting due to Kconfig warnings

CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/share/bridle-package/cmake/BridleConfig.cmake:51 (find_package)
  CMakeLists.txt:5 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:kconfig
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/logging/log_backend_uart
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Found devicetree overlay: ./single.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.single/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.single/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.single/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.single/zephyr/zephyr.dts:677.11-681.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice
Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/logging/log_backend_uart/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/logging/log_backend_uart/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.single/twister/testsuite_extra.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.single/zephyr/misc/generated/extra_kconfig_options.conf'

error: Aborting due to Kconfig warnings

CMake Error at zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:126 (find_package)

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:kconfig
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/logging/log_backend_uart
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Found devicetree overlay: ./multi.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.multi/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.multi/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.multi/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.multi/zephyr/zephyr.dts:677.11-681.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice
Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/logging/log_backend_uart/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/logging/log_backend_uart/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.multi/twister/testsuite_extra.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/logging/log_backend_uart/logging.backend.uart.multi/zephyr/misc/generated/extra_kconfig_options.conf'

error: Aborting due to Kconfig warnings

CMake Error at zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:126 (find_package)

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:dts
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/implementation
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/implementation/canbus.isotp.implementation/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/implementation/canbus.isotp.implementation/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/implementation/canbus.isotp.implementation/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/implementation/canbus.isotp.implementation/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)
Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/implementation
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/implementation/canbus.isotp.implementation/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/implementation/canbus.isotp.implementation/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/implementation/canbus.isotp.implementation/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/implementation/canbus.isotp.implementation/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/implementation/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/implementation/canbus.isotp.implementation/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:dts
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)
Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice
Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance/zephyr/misc/generated/extra_kconfig_options.conf'

error: Aborting due to Kconfig warnings

CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:dts
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.unused/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.unused/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.unused/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.unused/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)
Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.unused/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.unused/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.unused/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.unused/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.unused/twister/testsuite_extra.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.unused/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:dts
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_32/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_32/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_32/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_32/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)
Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_32/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_32/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_32/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_32/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice
Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_32/twister/testsuite_extra.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_32/zephyr/misc/generated/extra_kconfig_options.conf'

error: Aborting due to Kconfig warnings

CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:dts
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_64/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_64/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_64/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_64/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)
Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_64/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_64/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_64/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_64/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice
Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/canbus/isotp/conformance/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_64/twister/testsuite_extra.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/canbus/isotp/conformance/canbus.isotp.conformance.fd.txdl_64/zephyr/misc/generated/extra_kconfig_options.conf'

error: Aborting due to Kconfig warnings

CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/random/rng
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/random/rng/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/random/rng
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_sw_systimer/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_sw_systimer/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_sw_systimer/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_sw_systimer/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice
Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/random/rng/prj_sw_random_systimer.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_sw_systimer/zephyr/misc/generated/extra_kconfig_options.conf'

error: Aborting due to Kconfig warnings

CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:kconfig
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/random/rng
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_hw_xoshiro/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_hw_xoshiro/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_hw_xoshiro/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_hw_xoshiro/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/random/rng/prj_hw_random_xoshiro.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_hw_xoshiro/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:126 (find_package)

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:kconfig
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/random/rng
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_ctr_drbg/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_ctr_drbg/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_ctr_drbg/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_ctr_drbg/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/random/rng/prj_ctr_drbg.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/crypto.rng.random_ctr_drbg/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:126 (find_package)

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:kconfig
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/random/rng
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Found devicetree overlay: ./entropy_psa_crypto.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/drivers.rng.random_psa_crypto/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/drivers.rng.random_psa_crypto/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/drivers.rng.random_psa_crypto/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/drivers.rng.random_psa_crypto/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: TFM_PARTITION_CRYPTO (defined at modules/trusted-firmware-m/Kconfig.tfm.partitions:33,
modules/trusted-firmware-m/Kconfig.tfm.partitions:33) was assigned the value 'y' but got the value
'n'. Check these unsatisfied dependencies: (BUILD_WITH_TFM || (BUILD_WITH_TFM && 0)) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_TFM_PARTITION_CRYPTO and/or look up
TFM_PARTITION_CRYPTO in the menuconfig/guiconfig interface. The Application Development Primer,
Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be
helpful too.


warning: TFM_CRYPTO_RNG_MODULE_ENABLED (defined at modules/trusted-
firmware-m/Kconfig.tfm.crypto_modules:10, modules/trusted-firmware-m/Kconfig.tfm.crypto_modules:10)
was assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies:
((TFM_PARTITION_CRYPTO && BUILD_WITH_TFM) || (TFM_PARTITION_CRYPTO && BUILD_WITH_TFM && 0)) (=n).
See http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_TFM_CRYPTO_RNG_MODULE_ENABLED and/or
look up TFM_CRYPTO_RNG_MODULE_ENABLED in the menuconfig/guiconfig interface. The Application
Development Primer, Setting Configuration Values, and Kconfig - Tips and Best Practices sections of
the manual might be helpful too.


warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/subsys/random/rng/prj_hw_random_psa_crypto.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/subsys/random/rng/drivers.rng.random_psa_crypto/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:126 (find_package)

Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/counter/counter_basic_api
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/counter/counter_basic_api/drivers.counter.basic_api/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/counter/counter_basic_api/drivers.counter.basic_api/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/counter/counter_basic_api/drivers.counter.basic_api/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/counter/counter_basic_api/drivers.counter.basic_api/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/counter/counter_basic_api/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/counter/counter_basic_api/drivers.counter.basic_api/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:5 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:kconfig
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/uart/uart_async_rx
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_rx/drivers.uart.async_rx/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_rx/drivers.uart.async_rx/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_rx/drivers.uart.async_rx/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_rx/drivers.uart.async_rx/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/uart/uart_async_rx/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_rx/drivers.uart.async_rx/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:126 (find_package)

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:kconfig
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/uart/uart_async_api
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_api/drivers.uart.async_api/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_api/drivers.uart.async_api/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_api/drivers.uart.async_api/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_api/drivers.uart.async_api/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: UART_ASYNC_API (defined at
boards/shields/sparkfun_carrier_asset_tracker/Kconfig.defconfig:12, drivers/serial/Kconfig:66) was
assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies:
(SHIELD_SPARKFUN_CARRIER_ASSET_TRACKER || (SERIAL_SUPPORT_ASYNC && SERIAL)) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_UART_ASYNC_API and/or look up
UART_ASYNC_API in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.


warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/uart/uart_async_api/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/uart/uart_async_api/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_api/drivers.uart.async_api/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:126 (find_package)

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:kconfig
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/uart/uart_async_api
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_api/drivers.uart.async_api.lpuart/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_api/drivers.uart.async_api.lpuart/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_api/drivers.uart.async_api.lpuart/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_api/drivers.uart.async_api.lpuart/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: UART_ASYNC_API (defined at
boards/shields/sparkfun_carrier_asset_tracker/Kconfig.defconfig:12, drivers/serial/Kconfig:66) was
assigned the value 'y' but got the value 'n'. Check these unsatisfied dependencies:
(SHIELD_SPARKFUN_CARRIER_ASSET_TRACKER || (SERIAL_SUPPORT_ASYNC && SERIAL)) (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_UART_ASYNC_API and/or look up
UART_ASYNC_API in the menuconfig/guiconfig interface. The Application Development Primer, Setting
Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful
too.


warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/uart/uart_async_api/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/uart/uart_async_api/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/uart/uart_async_api/drivers.uart.async_api.lpuart/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:126 (find_package)

Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/hwinfo/api
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/hwinfo/api/drivers.hwinfo.api/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/hwinfo/api/drivers.hwinfo.api/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/hwinfo/api/drivers.hwinfo.api/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/hwinfo/api/drivers.hwinfo.api/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/hwinfo/api/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/hwinfo/api/drivers.hwinfo.api/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/watchdog/wdt_basic_api
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/watchdog/wdt_basic_api/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:dts
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/watchdog/wdt_basic_api
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Snippet(s): wdt-timing-adj
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Found devicetree overlay: boards/stm32_wwdg.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32wwdg.timing.adj/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32wwdg.timing.adj/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32wwdg.timing.adj/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32wwdg.timing.adj/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)
Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/watchdog/wdt_basic_api
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Snippet(s): wdt-timing-adj
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Found devicetree overlay: boards/stm32_wwdg.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/snippets/wdt-timing-adj/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32wwdg.timing.adj/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32wwdg.timing.adj/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32wwdg.timing.adj/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32wwdg.timing.adj/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/watchdog/wdt_basic_api/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32wwdg.timing.adj/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:dts
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/watchdog/wdt_basic_api
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Found devicetree overlay: boards/stm32_iwdg.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32iwdg/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32iwdg/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32iwdg/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32iwdg/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)
Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/watchdog/wdt_basic_api
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Found devicetree overlay: boards/stm32_iwdg.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32iwdg/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32iwdg/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32iwdg/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32iwdg/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/watchdog/wdt_basic_api/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/watchdog/wdt_basic_api/drivers.watchdog.stm32iwdg/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:kconfig
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/console/hello_world
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/console/hello_world/drivers.console.uart/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/console/hello_world/drivers.console.uart/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/console/hello_world/drivers.console.uart/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/console/hello_world/drivers.console.uart/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/console/hello_world/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/console/hello_world/drivers.console.uart/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
  zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:97 (include_boilerplate)
  zephyr/cmake/package_helper.cmake:126 (find_package)

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:dts
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/gpio/gpio_api_1pin
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_api_1pin/drivers.gpio.1pin/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_api_1pin/drivers.gpio.1pin/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_api_1pin/drivers.gpio.1pin/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_api_1pin/drivers.gpio.1pin/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)
Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/gpio/gpio_api_1pin
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_api_1pin/drivers.gpio.1pin/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_api_1pin/drivers.gpio.1pin/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_api_1pin/drivers.gpio.1pin/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_api_1pin/drivers.gpio.1pin/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/gpio/gpio_api_1pin/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_api_1pin/drivers.gpio.1pin/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:dts
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/gpio/gpio_basic_api
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_basic_api/drivers.gpio.2pin/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_basic_api/drivers.gpio.2pin/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_basic_api/drivers.gpio.2pin/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_basic_api/drivers.gpio.2pin/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)
Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/gpio/gpio_basic_api
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_basic_api/drivers.gpio.2pin/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_basic_api/drivers.gpio.2pin/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_basic_api/drivers.gpio.2pin/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_basic_api/drivers.gpio.2pin/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/gpio/gpio_basic_api/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/gpio/gpio_basic_api/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_basic_api/drivers.gpio.2pin/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!

Loading Zephyr module(s) (Zephyr base): extensions
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
Loading Zephyr module(s) (Zephyr base (cached)): zephyr_default:dts
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/gpio/gpio_get_direction
-- CMake version: 3.28.1
Loading Bridle default modules (Freestanding).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- ZEPHYR_TOOLCHAIN_VARIANT: zephyr
-- SDK_VERSION: 0.16.4
-- ZEPHYR_SDK_INSTALL_DIR  : /opt/zephyr-sdk-0.16.4
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_get_direction/drivers.gpio.get_direction/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_get_direction/drivers.gpio.get_direction/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_get_direction/drivers.gpio.get_direction/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_get_direction/drivers.gpio.get_direction/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)
Loading Zephyr default modules (Zephyr base).
-- Application: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/gpio/gpio_get_direction
-- CMake version: 3.28.1
Loading Bridle default modules (Bridle workspace).
-- Bridle version: 3.6.99 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle)
-- Found Python3: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3.8") found components: Interpreter 
-- Cache files will be written to: /home/ghashr/.cache/zephyr
-- Bridle is trying to locate Zephyr SDK 0.16.4...0.16.5.
-- Using Zephyr SDK 0.16.4 for compiling. (/opt/zephyr-sdk-0.16.4)
-- Zephyr version: 3.7.0-rc1 (/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr)
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
-- Board: magpie_f777ni, qualifiers: stm32f777xx
-- Shield(s): loopback_test_tmph
-- Found host-tools: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found toolchain: zephyr 0.16.4 (/opt/zephyr-sdk-0.16.4)
-- Found Dtc: /opt/zephyr-sdk-0.16.4/sysroots/aarch64-pokysdk-linux/usr/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6") 
-- Found BOARD.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni.dts
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/loopback_test_tmph.overlay
-- Found devicetree overlay: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.overlay
-- Generated zephyr.dts: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_get_direction/drivers.gpio.get_direction/zephyr/zephyr.dts
-- Generated devicetree_generated.h: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_get_direction/drivers.gpio.get_direction/zephyr/include/generated/zephyr/devicetree_generated.h
-- Including generated dts.cmake file: /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_get_direction/drivers.gpio.get_direction/zephyr/dts.cmake
/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_get_direction/drivers.gpio.get_direction/zephyr/zephyr.dts:676.11-680.6: Warning (unique_unit_address_if_enabled): /soc/spi@40013400/slow@0: duplicate unit-address (also used in node /soc/spi@40013400/fast@0)

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined with type unknown

warning: <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) defined without a prompt

warning: the default selection COUNTER_RTC_STM32_CLOCK_LSE (undefined) of <choice COUNTER_RTC_STM32_CLOCK_SRC> (defined at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/Kconfig.defconfig:9) is not contained in the choice

error: Aborting due to Kconfig warnings

Parsing /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/Kconfig
Loaded configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/tiac/magpie_f777ni/magpie_f777ni_defconfig'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/tests/drivers/gpio/gpio_get_direction/prj.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/bridle/boards/shields/loopback_test/boards/magpie_f777ni.conf'
Merged configuration '/home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/twister-out/magpie_f777ni/tests/drivers/gpio/gpio_get_direction/drivers.gpio.get_direction/zephyr/misc/generated/extra_kconfig_options.conf'
CMake Error at /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/kconfig.cmake:389 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/cmake/modules/zephyr_default.cmake:132 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include)
  /home/ghashr/actions-runner/tiacsys/_workspace/bridle/bridle/workspace/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
  CMakeLists.txt:4 (find_package)


-- Configuring incomplete, errors occurred!