Move ISHTP and ECLITE test cases and plans from iiotg provider and checkbox-iiotg-provder (New)

providers/base/units/ishtp/jobs.pxu

@@ -0,0 +1,112 @@
+unit: job
+category_id: intel-ishtp
+id: ishtp/module-detect
+plugin: shell
+_summary: Verifies that the intel_ish_ipc module for ISHTP is loaded
+imports: from com.canonical.plainbox import manifest
+requires:
+    manifest.has_ishtp == 'True'
+flags: simple
+command:
+    expected_modules='intel_ishtp_loader intel_ishtp_hid intel_ish_ipc intel_ishtp'
+    EXIT=0
+    for m in $expected_modules
+    do
+        echo "Checking module: $m"
+        if ! lsmod | grep -qw "$m"; then
+            echo "FAIL: The '$m' module is not loaded!"
+            EXIT=1
+        else
+            echo "PASS: It's loaded"
+        fi
+        echo
+    done
+    exit $EXIT
+
+unit: job
+category_id: intel-ishtp
+id: ishtp/device-detect
+plugin: shell
+_summary: Verify that at least 1 device entry exists in /sys/bus/ishtp/devices
+depends: ishtp/module-detect
+command:
+    DIR="/sys/bus/ishtp/devices/"
+    if ! [ -d "$DIR" ]; then
+        echo "ishtp devices directory does not exist!"
+        exit 1
+    fi
+    if ! [ "$(ls -A $DIR)" ]; then
+        # empty, fail
+        echo "ishtp devices directory empty - no devices found!"
+        exit 1
+    fi
+    echo "found ishtp devices"
+    exit 0
+
+unit: job
+category_id: intel-ishtp
+id: eclite/module-detect
+plugin: shell
+_summary: Verifies that the ishtp_eclite module is loaded
+flags: simple
+imports: from com.canonical.plainbox import manifest
+requires:
+    manifest.has_eclite == 'True'
+command:
+    if lsmod | grep -w ishtp_eclite; then
+        echo "ishtp_eclite module loaded"
+    else
+        echo "The 'ishtp_eclite' module isn't loaded!"
+        echo "Please make sure this feature is supported on this platform and check the BIOS setting."
+        exit 1
+    fi
+
+unit: job
+category_id: intel-ishtp
+id: eclite/temperature-reading-from-thermal-acpitz
+_summary: Read the temperature of acpitz to make sure Eclite is functional
+depends: eclite/module-detect
+_description:
+    For testing the feature of Eclite, one way is to monitor the
+    temperature of acpitz thermal.
+    Read the CPU temperature, run stress-ng for 5 minutes, then check the CPU
+    temperature again.
+    The temperatures should be non-zero, and the temperature after the stress
+    test should be higher.
+    If any of these conditions is not true, the test fails.
+plugin: shell
+user: root
+command:
+    THERMAL_PATH="/sys/class/thermal/thermal_zone"
+    THERMALS=$(find $THERMAL_PATH*[0-9])
+    ACPITZ_THERMAL_PATH=""
+    # Get the acpitz thermal
+    for t in $THERMALS; do
+        THERMAL_TYPE=$(cat "$t/type")
+        if [ "$THERMAL_TYPE" = "acpitz" ]; then
+            ACPITZ_THERMAL_PATH=$t
+            break
+        fi
+    done
+    # Check acpitz thermal can be found
+    if [ -z "$ACPITZ_THERMAL_PATH" ]; then
+        echo "Cannot find the acpitz thermal"
+        exit 1
+    fi
+    echo "The path of acpitz thermal: $ACPITZ_THERMAL_PATH"
+    # Do testing and monitor the temperature
+    ACPITZ_TEMP="$ACPITZ_THERMAL_PATH/temp"
+    TEMP_BEFORE=$(cat "$ACPITZ_TEMP")
+    echo "Temperature before stress: $TEMP_BEFORE"
+    if ! [ "$TEMP_BEFORE" -gt 0 ]; then
+        echo "Invalid temperature, it should be more than 0"
+        exit 1
+    fi
+    echo "Running stress for 5 minutes"
+    stress-ng --matrix 0 -t 5m
+    TEMP_AFTER=$(cat "$ACPITZ_TEMP")
+    echo "Temperature after stress: $TEMP_AFTER"
+    if ! [ "$TEMP_AFTER" -gt "$TEMP_BEFORE" ]; then
+        echo "The temperature after stress testing should be higher than before"
+        exit 1
+    fi

providers/base/units/ishtp/manifest.pxu

@@ -0,0 +1,9 @@
+unit: manifest entry
+id: has_ishtp
+_name: Has support for Intel Integrated Sensor Hub Tranport Protocol (ISHTP)
+value-type: bool
+
+unit: manifest entry
+id: has_eclite
+_name: Has support for Intel ISHTP eclite controller Driver (ECLITE)
+value-type: bool

providers/base/units/ishtp/testplan.pxu

@@ -0,0 +1,26 @@
+id: ishtp-full
+_name: Intel Integrated Sensor Hub Transport Protocol (ISHTP) tests (Full)
+unit: test plan
+include: 
+nested_part:
+    ishtp-manual
+    ishtp-automated
+
+id: ishtp-manual
+_name: Intel Integrated Sensor Hub Transport Protocol (ISHTP) tests (Manual)
+unit: test plan
+include: 
+nested_part:
+
+id: ishtp-automated
+_name: Intel Integrated Sensor Hub Transport Protocol (ISHTP) tests (Automated)
+unit: test plan
+include:
+    ishtp/module-detect
+    ishtp/device-detect
+    eclite/module-detect
+    eclite/temperature-reading-from-thermal-acpitz
+nested_part:
+bootstrap_include:
+    device
+    module