WiFi Settings
Enable: Toggle to enable / disable WiFi connection.
Network: The SSID of the WiFi network.
Password: The Password of the WiFi network.
Nameserver: The nameserver of the WiFi network.
Static IP: Toggle to enable / disable use of a static IP address.
IP: (only for Static IP) The static IP address to assign.
Netmask: (only for Static IP) The netmask for use with static IP.
Gateway: (only for Static IP) The gateway for use with static IP.
Power saving:
Disabled - No power saving
On Plus and newer devices / ESP32 and ESP32C3:
2 - Maximal Saving 1 - Minimal Saving 0 - No saving
On Gen1 Devices / ESP8266
2 - Modem Sleep Mode: your modem (Wi-Fi) will periodically go to sleep i.e. power save mode in between. This saves some energy.
1 - Light Sleep mode: additionally to the modem the processor will periodically also sleep. This saves even more energy.
0 - No sleep
Status: Shows the current connection status.
Network: Shows the network name (SSID) of the current connection.
IP: Shows the local IP address of the current connection.
RSSI: Shows the strength of the current connection.
RSSI levels:
- -30 -> -66 Very Good
- -67 -> -70 Good
- -71 -> -79 OK
- -80 -> -90 Bad
MAC: Shows the MAC address of the device.
[Save] button: saves settings.