Hardware Tonbux Powerstrip02
| Property | Value |
|---|---|
| Manufacturer | Tonbux |
| Product page | Amazon Link |
| Wiki page | |
| Build flag | TONBUX_POWERSTRIP02 |
Size: 7.8”x 3.9” x 1.1”
Power Cord Length: 5ft
Outlet Voltage: AC110-240V 10A
Rated Power: 1250W
USB Max Output: 2.1A
Material: ABS Flame-Retardant Polycarbonate
4 AC Outlets + 4 USB Charging Ports
(4 Outlets can be controlled individual, 4 USB ports are controlled as one)
It seems it has support for HLW8012, but it's unpopulated.
Flashing the board by hand cannot be performed easily with a RPi (50mA) or Bus Pirate's (150mA) onboard power supply. If you have a spare AdaFruit Huzzah or similar laying around, the AP2112 outputs a constant 600mA, which allows sufficient power to enable flashing of the chip. This will then require you to connect the GND of your programmer to the common GND provided by your power supply. Also connect the CS / GPIO0 to the GND to enable programming.
TODO