pwmoff

PWMOff

Syntax:

    PWMOff

Command Availability:

Only available on Microchip PIC microcontrollers with Capture/Compare/PWM module CCP1.

This command does not operate on any other CCP channel.

Explanation:

This command will disable the output of the CCP1/PWM module on the Microchip PIC chip.

Example:

    'This program will enable a 76 Khz PWM signal, with a duty cycle
    'of 80%. It will emit the signal for 10 seconds, then stop.
    #define PWM_Freq 76    'Set frequency in KHz
    #define PWM_Duty 80    'Set duty cycle to 80 %
    PWMOn                  'Turn on the PWM
    WAIT 10 s              'Wait 10 seconds
    PWMOff                 'Turn off the PWM

For more help, also see PWMOn